onsemi FAN48632
The FAN48632 allows systems to take advantage of new battery chemistries that can supply significant energy when the battery voltage is lower than the required voltage for system power ICs. By combining built−in power transistors, synchronous rectification, and low supply current; this IC provides a compact solution for systems using advanced Li−Ion battery chemistries. The FAN48632 is a boost regulator designed to provide a minimum output voltage (VOUT(MIN)) from a single−cell Li−Ion battery, even when the battery voltage is below system minimum.| Part No. | FAN48632 |
|---|---|
| Datasheet | FAN48632 Download |
| Manufacturer |  onsemi |
| Description | Pulsed-Load Synchronous Regulator |
| Buy | Stock & Price |
DESCRIPTION
In boost mode, output voltage regulation is guaranteed to a maximum load current of 1.5 A continuous and 2.0 A pulsed. Quiescent current in Shutdown Mode is less than 3 mA, which maximizes battery life. The regulator transitions smoothly between Bypass and normal Boost Mode. The device can be forced into Bypass Mode to reduce quiescent current. The FAN48632 is available in a 16−bump, 0.4 mm pitch, Wafer−Level Chip−Scale Package (WLCSP).FEATURES
● Few External Components: 0.47 mH Inductor and 0603 Case Size Input and Output Capacitors● Input Voltage Range: 2.35 V to 5.5 V
● Fixed Output Voltage: 3.3 V to 3.5 V
● Maximum Continuous Load Current of: 1.5 A at VIN of 2.6 V
● Maximum Pulsed Load Current of: 2.0 A for GSM 217 Hz Repetition Rate, boosting VOUT to 3.3 V or 3.5 V
● Up to 96% Efficient
● True Bypass Operation when VIN > Target VOUT
● Internal Synchronous Rectifier
● Soft−Start with True Load Disconnect
● Forced Bypass Mode
● VSEL Control to Optimize Target VOUT
● Sh...
