onsemi NB6L72
The NB6L72 is a clock or data high-bandwidth fully differential 2 x 2 Crosspoint Switch with internal source termination and LVPECL output structure, optimized for low skew and minimal jitter. The differential inputs incorporate internal 50 W termination resistors and will accept LVPECL, CML, LVDS, LVCMOS, or LVTTL logic levels. The SELECT inputs are single-ended and can be driven with LVCMOS/LVTTL.| Part No. | NB6L72 |
|---|---|
| Datasheet | NB6L72 Download |
| Manufacturer |  onsemi |
| Description | Differential 2 X 2 Crosspoint Switch |
| Buy | Stock & Price |
DESCRIPTION
The differential LVPECL outputs provide 800 mV output swings when externally terminated with a 50 W resistor to VCC – 2.0 V. The device is offered in a small 3 mm x 3 mm 16-pin QFN package. The NB6L72 is a member of the ECLinPS MAXt family of high performance clock and data management products.FEATURES
●ăInput Clock Frequency > 3.0GHz●ăInput Data Rate > 3 Gb/s
●ă425 ps Typical Propagation Delay
●ă100 ps Typical Rise and Fall Times
●ă0.5 ps maximum RMS Clock Jitter
●ăLVPECL, CML or LVDS Input Compatible
●ăDifferential LVPECL Outputs, 800 mV Amplitude, Typical
●ăOperating Range: VCC = 2.375 V to 3.63 V with GND = 0 V
●ăInternal 50 W Input Termination Provided
●ăFunctionally Compatible with Existing 2.5 V/3.3 V LVEL, LVEP, EP, and SG Devices
●ă-40°C to +85°C Ambient Operating Temperature
●ăThese are Pb-Free Devices 1 QFN-16 MN SUFFIX CASE 485G MARKING DIAGRAM* 16 1 NB6L 72 ALYWG G A = Assembly Location L = Wafer Lot Y = Year W = Work Week G = Pb-Free Package (Note: Microdot may be in either location) *For additional marking information, refer to Application Note AND8002/D.
