onsemi NB6L72M
The NB6L72M is a clock or data high-bandwidth fully differential 2 x 2 Crosspoint Switch with internal source termination and CML output structure, optimized for low skew and minimal jitter. The differential inputs incorporate internal 50 W termination resistors and will accept LVPECL, CML, LVDS, LVCMOS, or LVTTL logic levels. The SELECT inputs are single-ended and can be driven with LVCMOS/LVTTL.| Part No. | NB6L72M |
|---|---|
| Datasheet | NB6L72M Download |
| Manufacturer |  onsemi |
| Description | Differential 2 x 2 Crosspoint Switch |
| Buy | Stock & Price |
DESCRIPTION
The 16 mA differential CML outputs provide matching internal 50 W terminations and 400 mV output swings when externally terminated with a 50 W resistor to VCC. The device is offered in a small 3 mm x 3 mm 16-pin QFN package. The NB6L72M is a member of the ECLinPS MAX™ family of high performance clock and data management products.FEATURES
●ăInput Clock Frequency > 3.0 GHz●ăInput Data Rate > 3 Gb/s
●ă360 ps Typical Propagation Delay
●ă65 ps Typical Rise and Fall Times
●ăDifferential CML Outputs, 380 mV peak-to-peak, typical
●ăOperating Range: VCC = 2.375 V to 3.63 V with GND = 0 V
●ăInternal Input and Output Termination Resistors, 50 W
●ăFunctionally Compatible with Existing 2.5 V / 3.3 V LVEL, LVEP, EP, and SG Devices
●ă-40 °C to +85°C Ambient Operating Temperature
●ăThese are Pb-Free Devices 1 QFN-16 MN SUFFIX CASE 485G MARKING DIAGRAM* 16 1 NB6L 72M ALYWG G A = Assembly Location L = Wafer Lot Y = Year W = Work Week G = Pb-Free Package (Note: Microdot may be in either location) *For additional marking information, refer to Application Note AND8002/D.
