onsemi NCP6360
The NCP6360, a PWM synchronous step−down DC−to−DC converter, is optimized for supplying RF Power Amplifiers (PAs) used into 3G/4G wireless systems (Mobile/ Smart Phones, Phablets, Tablets, ...) powered by single−cell Lithium−Ion batteries. The device is able to deliver up to 800 mA. The output voltage is monitorable from 0.6 V to 3.4 V by an analog control pin VCON.| Part No. | NCP6360 |
|---|---|
| Datasheet | NCP6360 Download |
| Manufacturer |  onsemi |
| Description | Mini Buck Converter |
| Buy | Stock & Price |
FEATURES
● Input Voltage from 2.7 V to 5.5 V for Battery PoweredAPPLICATIONS
● Adjustable Output Voltage (0.6 V to 3.4 V)● 6 MHz Switching Frequency
● Uses 470 nH Inductor and 4.7 mF Capacitor for Optimized Footprint and Solution Thickness
● PFM /PWM Automatic Mode Change for High Efficiency
● Low 30 mA Quiescent Current
● Thermal Protections to Avoid Damage of the IC
● Small 1.5 x 1.0 mm / 0.5 mm Pitch CSP Package
● This is a Pb−Free Device Typical
APPLICATIONS
● 3G / 4G Wireless Systems, Smart Phones, Phablets and Webtablets WLCSP6, 1.00x1.50 CASE 568AN MARKING DIAGRAM 60 AYW G A = Assembly Location Y = Year W = Work Week G = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION See detailed ordering, marking and shipping information on page 16 of this data sheet. VCON Voltage control From external DAC EN Processor or System Supply NCP6360 Vout Control Thermal Protection Enabling DCDC Buck 1.0 A 6.0 MHz FB PVIN VBAT (Battery or System Supply) 10 mF SW DCDC Out 0.47 mH PGND 4.7 mF Rev 0.00 Figure 1.
