TM57PA40 Datasheet | tenx technology

Description New release 1. Change ADC6 to PD6. 2. Modify ADC sample code. 3. Add DC characteristics. 4. Add WDT Prescaler. 1. Modify system clock mode for fast crystal 455 KHz ~ 12 MHz. 2. In SYSCFG section, [11:10]=2‟b10, LVR disable in sleep mode. 3. Add 8 DIP/SOP in packet types in Features section. 4. Add 8 SOP, 8 DIP figure in Pin Assignment section. 5. Modify CLRWDT instruction description . 6. Modify DC characteristics. 1. Modify DC characteristics. 2. Modify n PBPU: the pin‟s output data register (PBD) is 0. 3. Modify CLRWDT. 4. Modify the Operating temperature bees -40 to +85℃, and storage temperature bees -65 to +150℃. 1. Remove 8 DIP/SOP in packet types in Features section. 2. Remove 8 SOP, 8 DIP figures in Pin Assignment section. 3. Add FSR.7 fixed 0 in F-Plane. 4. Modify CALL/GOTO range to 0x FFF. 5. Modify the IC pin number in Packaging Information section. 6. Modify PA1 set by rising/falling edge and PA6 is set by falling edge. 1. Remove the description about Bit 11-10 : 10, 00 in SYSCFG section. 2. In IDD stop mode section : modify the power supply current column for different LVR condition and different VDD. 1. Add more description about /Borrow and /Digit Borrow in ALU and Working (W) Register section. 2. Add Internal RC mode description and figure in System Clock Oscillator section. 3. Modify the status affected of the NOP instruction. 4. Modify the equation of the frequency calculation in Buzzer Output section. 1. Modify the package type data. 2. Add description about LVR selection in Reset Section. 3. Modify the data in DC Characteristics. Add Ordering Information table in the Packaging Information section. Modify Ordering Information table in the Packaging...