CI770-100A Datasheet | tokmas

Features Safety - Hall effect measuring principle - AISC - Output proportional to power supply variation （including offset and sensitivity） - Galvanic separation between primary and secondary - Insulating plastic case recognized according to UL 94-V0 - No insertion losses - Small size This transducer must be used in limited-energy secondary circuits according to IEC61010-1. This transducer must be used in electric/electronic equipment with respect to applicable standards and safety requirements in accordance with the following manufacture’s operating instructions. Caution, risk of electrical shock Industrial Applications - AC variable speed drivers - Uninterruptible Power Supplies (UPS) - Static converters for DC motor drives - Switched Mode Power Supplies (SMPS) - Power supplies for welding applications - Battery supplied applications - Windmill inverters When operating the transducer, certain parts of the module can carry hazardous voltage (e.g., Primary busbar, power supply). Ignore this warning can lead to injury and/or cause serious damage. This transducer is a built-in device, whose conducting parts must be inaccessible after installation. A protective housing or additional shield could be used. Main supply must be able to be disconnected. .tokmas. Current Transducer Absolute maximum ratings Parameter Symbol Supply voltage Max. allowable output current @ IPN or VPN Iout ESD rating, Human Body Model (HBM) VESD ESD rating, Human Body Model (HBM) VESD ※ Stresses above these ratings may cause permanent damage. ※ Exposure to absolute maximum ratings for extended periods may degrade reliability. Unit V m A V V Value 6 4 4000 4000 Environmental and mechanical characteristics...