| Part Number | 74HCT367 Datasheet |
|---|---|
| Manufacturer | Philips Semiconductors |
| Overview |
The 74HC/HCT367 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7. QUICK REFERENCE DATA GND = 0.
* Non-inverting outputs * Output capability: bus driver * ICC category: MSI GENERAL DESCRIPTION The 74HC/HCT367 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7. QUICK REFERENCE DATA GND = 0 V; . |
74HCT367 Datasheet and Specifications PDF
The 74HCT367 is a Hex buffer/line driver.
| Part Number | 74HCT367 Datasheet |
|---|---|
| Description | Hex buffer/line driver |
| Manufacturer | Nexperia |
| Overview |
The 74HC367; 74HCT367 is a hex buffer/line driver with 3-state outputs controlled by the output enable inputs (nOE). A HIGH on nOE causes the outputs to assume a high impedance OFF-state. Inputs inclu.
and benefits
* Wide supply voltage range from 2.0 V to 6.0 V * CMOS low power dissipation * High noise immunity * Latch-up performance exceeds 100 mA per JESD 78 Class II Level B * Complies with JEDEC standards: * JESD8C (2.7 V to 3.6 V) * JESD7A (2.0 V to 6.0 V) * 3-state outputs * Input levels: * . |
| Part Number | 74HCT367 Datasheet |
|---|---|
| Description | Three-State Non-Inverting and Inverting |
| Manufacturer | Texas Instruments |
| Overview |
The ’HC367, ’HCT367, ’HC368, and CD74HCT368 silicon gate CMOS three-state buffers are general purpose high-speed non-inverting and inverting buffers. The ’HC367 and ’HCT367 are non-inverting buffers,.
* Buffered inputs * High current bus driver outputs * Two independent three-state enable controls * Typical propagation delay tPLH, tPHL = 8 ns at VCC = 5 V, CL =15 pF, TA = 25℃ * Fanout (over temperature range) * Standard outputs: 10 LSTTL Loads * Bus driver outputs: 15 LSTTL Loads * Wide operating. |