| Part Number | 74HCT368 Datasheet |
|---|---|
| Manufacturer | Philips Semiconductors |
| Overview |
The 74HC/HCT368 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. QUICK REFERENCE DATA GND = .
* Inverting outputs * Output capability: bus driver * ICC category: MSI GENERAL DESCRIPTION The 74HC/HCT368 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. QUICK REFERENCE DATA GND = 0 V; Tam. |
74HCT368 Datasheet and Specifications PDF
The 74HCT368 is a Hex buffer/line driver.
| Part Number | 74HCT368 Datasheet |
|---|---|
| Description | Hex buffer/line driver |
| Manufacturer | Nexperia |
| Overview |
The 74HC368; 74HCT368 is a hex inverting buffer/line driver with 3-state outputs controlled by the output enable inputs (nOE). A HIGH on nOE causes the outputs to assume a high impedance OFF-state. In.
and benefits
* Wide supply voltage range from 2.0 to 6.0 V * Input levels: * For 74HC368: CMOS level * For 74HCT368: TTL level * CMOS low power dissipation * High noise immunity * Inverting 3-state outputs * Complies with JEDEC standards * JESD8C (2.7 V to 3.6 V) * JESD7A (2.0 V to 6.0 V) * Latch-up. |
| Part Number | 74HCT368 Datasheet |
|---|---|
| Description | Three-State Non-Inverting and Inverting |
| Manufacturer | Texas Instruments |
| Overview |
The ’HC367, ’HCT367, ’HC368, and CD74HCT368 silicon gate CMOS three-state buffers are general purpose high-speed non-inverting and inverting buffers. The ’HC367 and ’HCT367 are non-inverting buffers,.
* Buffered inputs * High current bus driver outputs * Two independent three-state enable controls * Typical propagation delay tPLH, tPHL = 8 ns at VCC = 5 V, CL =15 pF, TA = 25℃ * Fanout (over temperature range) * Standard outputs: 10 LSTTL Loads * Bus driver outputs: 15 LSTTL Loads * Wide operating. |