| Part Number | BT136S-600D |
|---|---|
| Manufacturer | NXP Semiconductors |
| Overview |
Planar passivated very sensitive gate four quadrant triac in a SOT428 (DPAK) surface-mountable plastic package intended for use in general purpose bidirectional switching and phase control application.
and benefits
* Direct triggering from low power drivers and logic ICs * High blocking voltage capability * Low holding current for low current loads and lowest EMI at commutation * Planar passivated for voltage ruggedness and reliability * Surface-mountable package * Triggering in all four quadrants. |
BT136S-600D Datasheet
The BT136S-600D is a 4Q Triac.
| Part Number | BT136S-600D |
|---|---|
| Description | 4Q Triac |
| Manufacturer | WeEn |
| Overview |
Planar passivated very sensitive gate four quadrant triac in a SOT428 (DPAK) surface-mountable plastic package intended for use in general purpose bidirectional switching and phase control application.
and benefits
* Direct triggering from low power drivers and logic ICs * High blocking voltage capability * Low holding current for low current loads and lowest EMI at commutation * Planar passivated for voltage ruggedness and reliability * Surface-mountable package * Triggering in all four quadrants. |
| Part Number | BT136S-600D |
|---|---|
| Description | Triacs |
| Manufacturer | Inchange Semiconductor |
| Overview |
·High blocking voltage capability ·Surface-mountable package ·Low holding current for low current loads and lowest
EMI at commutation. ·Triggering in all four quadrants ·Very sensitive gate ·Minimum L.
*General purpose motor control *General purpose switching ABSOLUTE MAXIMUM RATINGS(Ta=25℃) SYMBOL PARAMETER VDRM IT(RMS) Repetitive peak off-state voltage RMS on-state current (full sine wave;Tmb≤107℃) Non-repetitive peak on-state current(Tj=25℃;Tp=20ms) ITSM Non-repetitive peak on-state curre. |
| Part Number | BT136S-600D |
|---|---|
| Description | Sensitive Gate Triacs |
| Manufacturer | HAOPIN |
| Overview |
Passivated, sensitive gate triacs in a plastic envelope, intended for use in general purpose bidirectional switching and phase control applications, where high sensitivity is required in all four quad.
* Blocking voltage to 600 V On-state RMS current to 4 A Value 600 4 25 Unit V A A SYMBOL Rth j-mb PARAMETER Thermal resistance junction to mounting base CONDITIONS full cycle half cycle MIN - TYP - MAX 3.0 3.7 UNIT K/W K/W Rth j-a Thermal resistance Junction to ambient Pcb(FR4)mounteb fo. |