TL494 Datasheet and Specifications PDF

The TL494 is a PULSE WIDTH MODULATION CONTROLLER.

TL494 integrated circuit image
Datasheet4U Logo
Part NumberTL494 Datasheet
ManufacturerMotorola Semiconductor
Overview Order this document by TL494/D SWITCHMODE™ Pulse Width Modulation Control Circuit The TL494 is a fixed frequency, pulse width modulation control circuit designed primarily for SWITCHMODE power supply. mplifier Input Voltage Range Power Dissipation @ TA ≤ 45°C Thermal Resistance, Junction
*to
*Ambient VIR PD RθJA
*0.3 to +42 1000 80 V mW °C/W Operating Junction Temperature TJ Storage Temperature Range Tstg Operating Ambient Temperature Range TA TL494C TL494I 125 °C
*55 to +125 °C °C 0 t.
Part NumberTL494 Datasheet
DescriptionPulse-Width-Modulation Controller
ManufacturerTexas Instruments
Overview The TL494 device incorporates all the functions required in the construction of a pulse-widthmodulation (PWM) control circuit on a single chip. Designed primarily for power-supply control, this device.
* Complete PWM Power-Control Circuitry
* Uncommitted Outputs for 200-mA Sink or Source Current
* Output Control Selects Single-Ended or Push-Pull Operation
* Internal Circuitry Prohibits Double Pulse at Either Output
* Variable Dead Time Provides Control Over Total Range
* Internal Regulator Provide.
Part NumberTL494 Datasheet
DescriptionSMPS Controller
ManufacturerFairchild Semiconductor
Overview The TL494 is used for the control circuit of the PWM switching regulator. The TL494 consists of 5V reference voltage circuit, two error amplifiers, flip flop, an output control circuit, a PWM comparat.
* Internal regulator provides a stable 5V reference supply trimmed to 5%
* Uncommitted output TR for 200mA sink or source current
* Output control for push-pull or single-ended operation
* Variable duty cycle by dead time control (pin 4) Complete PWM control circuit
* On-chip oscillator with master .
Part NumberTL494 Datasheet
DescriptionPulse-Width-Modulation Controller
ManufacturerHTC KOREA
Overview The TL494 incorporates on a single monolithic chip all the functions required in the construction of a pulse width modulation control circuit. Designed primarily for power supply control, this device.
* Complete PWM Power Control Circuitry
* Uncommitted Outputs for 200mA Sink or Source Current
* Output Control Selects Single-Ended or Push-Pull Operation
* Internal Circuitry Prohibits Double Pulse at Either Output
* Variable Dead-Time Provides Control over Total Range
* Internal Regulator Provides.