·
102 Hits
2. Applications
Power IC developed for car audio applications.
Weight: 7.7 g (typ.)
3. Features
• High output power, low distortion, and low nois...
·
93 Hits
• High power output : POUT MAX (1) = 43 W (typ.) P (VCC = 14.4 V, f = 1 kHz, JEITA max, RL = 4 Ω) : POUT MAX (2) = 39 W (typ.) (VCC = 13.7 V, f = 1 kH...
·
63 Hits
2. Applications
Power IC developed for car audio applications.
Weight: 7.7 g (typ.)
3. Features
High output power, low distortion, and low nois...
·
21 Hits
Attenuation can be controlled from 0dB to 78dB by up, down input. This IC have 20dB tap for loudness circuit. This IC features a builtin DC output c...
·
15 Hits
• Supply current: 0.55 mA in combo high-performance mode • “Always-on" experience with low power consumption for both accelerometer
and gyroscope • Sm...
·
14 Hits
2. Applications
Power IC developed for car audio applications.
Weight: 7.7 g (typ.)
3. Features
High output power, low distortion, and low noise ...
·
14 Hits
• 2.3-5.0V input voltage range • Adjustable output voltage from 2.5V to 5.5V • Pseudo-constant frequency: 1MHz • 3A peak current limit • Input under v...
·
13 Hits
Supports Common Flash Memory Interface (CFI) Erase suspend/erase resume
– Suspends erase operations to read data from, or program data to, a secto...
·
12 Hits
n Single Power Supply Operation
n
n n
n n
n
n n n n n
− Read, program, and erase operations from 1.8 to 2.2 V (2.0V ± 10%) − Ideal for battery-...
·
12 Hits
Weight: 7.7 g (typ.)
• High power output : POUT MAX (1) = 41 W (typ.) (VCC = 14.4 V, f = 1 kHz, JEITA max, RL = 4 Ω) : POUT MAX (2) = 37 W (typ.) (V...
·
11 Hits
• High power output : POUT MAX (1) = 47 W (typ.) (VCC = 14.4 V, f = 1 kHz, JEITA max, RL = 4 Ω) : POUT MAX (2) = 43 W (typ.) (VCC = 13.7 V, f = 1 kHz,...
·
11 Hits
a 2 kB FIFO and 2 programmable interrupts with ultra-low-power wake-on-motion support to minimize system power consumption.
The ICM-42605 supports the...
·
9 Hits
■ Handshaking feature — Provides host system with minimum possible latency by monitoring RDY — Reduced Wait-state handshaking option further reduces i...
·
9 Hits
■ Power supply voltage of 2.7 to 3.3 volt ■ High performance
— Access time as fast as 55 ns
■ Minimum 1 million erase cycles guaranteed per sector ■ ...
·
9 Hits
ARCHITECTURAL ADVANTAGES
■ 128 Mbit Page Mode device
— Page size of 8 words: Fast page read access from random locations within the page
■ Both top a...
·
9 Hits
Low offset voltage: 150 µV max Input offset drift: 1.5 µV/°C max Low noise: 0.25 μV p-p High gain CMRR and PSRR: 115 dB min Low supply current: 1.1 mA...
This website uses cookies or similar technologies, to enhance your browsing experience and provide personalized recommendations. By continuing to use our website, you agree to our Privacy Policy