·
19 Hits
exceptionally low dynamic impedance and good temperature stability. On-chip trimming is used to provide tight voltage tolerance. Since the LM185 band-...
·
18 Hits
combined with extremely low input currents, high open loop voltage gain, high useful bandwidth, and slew rate make the ALD2711A/ALD2711B/ALD2711 a ve...
·
17 Hits
n Selects Highest Priority Valid Supply from Two Inputs
n Wide 1.8V to 18V Operating Range n Internal Dual 2Ω, 0.5A Switches n Low 3.6µA Operating Cur...
·
17 Hits
exceptionally low dynamic impedance and good temperature stability. On-chip trimming is used to provide tight voltage tolerance. Since the LM185 band-...
·
16 Hits
combined with extremely low input currents, high open loop voltage gain of 100V/mV, useful bandwidth of 700KHz, a slew rate of 0.7V/µs, low power dis...
·
16 Hits
of the LT3013 include a PWRGD flag to indicate output regulation. The delay between regulated output level and flag indication is programmable with a si...
·
16 Hits
-40°C to +125°C operating temperature Industrial level 1.65 V to 5.5 V operating Vcc range Micropower operation version available:
20 Hz smpli...
·
15 Hits
s 20µA to 20mA Operating Range s Guaranteed 1% Initial Voltage Tolerance s Guaranteed 1Ω Dynamic Impedance s Very Low Power Consumption
U APPLICATIO S...
·
15 Hits
s 5V ±2% Output s Low 140µA (typ) Quiescent Current s 150mA Output Current Capability s Fault Protection -15V Reverse Voltage Output Current Limit s L...
·
13 Hits
exceptionally low dynamic impedance and good temperature stability. On-chip trimming provides tight voltage tolerance. The band-gap reference for thes...
·
13 Hits
n Standard output voltage: 1.00V n Custom voltages available from 1.0V to 1.2V (50 mV increments) n Input voltage: 2.2 to 6.0V n 1% initial output acc...
·
12 Hits
l l l l l l l
n DESCRIPTION
The AIC1652 is a high performance inverting DC/DC converter, designed to drive an external power switch to generate progr...
·
12 Hits
Linear Hall Effect Sensor with +/-430G Sense Range and Output Voltage with 8-bit resolution
Supply Voltage of 1.6V to 3.6V Sensitivity: 2.1mV/G ...
·
12 Hits
1
•2 Adjustable from 1.24V to 5.30V • Operating Current of 10μA to 20mA • 1Ω Dynamic Impedance • Low Temperature Coefficient
DESCRIPTION
The LM185 ar...
·
12 Hits
-40°C to +125°C operating temperature Industrial level 1.65 V to 5.5 V operating Vcc range Micropower operation version available:
20 Hz smpli...
·
11 Hits
n n n n n n n n High accuracy 5V guaranteed 100mA output Extremely low quiescent current Low dropout voltage Extremely tight load and line regulation ...
This website uses cookies or similar technologies, to enhance your browsing experience and provide personalized recommendations. By continuing to use our website, you agree to our Privacy Policy