AH180 Datasheet | Diodes Incorporated

Description The AH180 is a micro-power Omnipolar Hall-Effect switch designed for portable and battery powered equipment such cellular phones, PDAs and portable PCs. Based on two Hall-Effect plates and a chopper stabilized architecture the AH180 provides a reliable solution over the whole operating range. To support portable and battery powered equipment the design has been optimized to operate over the supply range of 2.5V to 5.5V and consumes only 24μW with a supply of 3V. Pin Assignments (Top View) SIP-3 (Bulk Pack) 3. OUTPUT 2. GND 1. VDD The single open-drain output switches on with either a north or south pole of sufficient strength. (Top View) When the magnetic flux density (B) is larger than operate point (Bop), output is switched on (OUTPUT pin is pulled low). The output is turned off when B bees lower than the release point (Brp). The output will remain off when there is no magnetic field. The AH180 is available in SIP-3 (Ammo Pack), SIP-3 (Bulk Pack) and SC59 packages. GND 2 3 OUTPUT 1 VDD SC59 Features - Omnipolar (North or South pole) Operation - Micropower Operation - Single Open Drain Output - 2.5V to 5.5V Operating Voltage - Chopper Stabilized Design Provides - Superior Temperature Stability - Minimal Switch-Point Drift - Enhanced Immunity to Stress - Good RF Noise Immunity - -40°C to +85°C Operating Temperature - ESD (HBM) ＞ 6k V for SIP-3 (Ammo Pack), SIP-3 (Bulk Pack) and SC59 Packages - SIP-3 (Ammo Pack), SIP-3 (Bulk Pack), SC59 (monly Known as SOT23 in Asia) Packages - Totally Lead-Free & Fully Ro HS pliant (Notes 1 & 2) - Halogen and Antimony Free. “Green” Device (Note 3) - For automotive applications requiring specific change control (i.e. parts qualified to AEC-Q100/101/200, PPAP capable, and manufactured in IATF 16949 certified facilities), please contact us or your local Diodes representative. https://.diodes./quality/product-definitions/ Applications - Cover Switch in Clam-Shell Cellular Phones - Cover Switch in Notebook PC/PDA -...