Datasheet4U Logo Datasheet4U.com

AH1806 - HIGH SENSIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH

General Description

The AH1806 is a high-sensitivity, micro-power Omnipolar Hall effect switch IC, designed for portable and battery powered consumer to home appliance and industrial applications such as smart-meter magnetic tamper detection.

Key Features

  • Omnipolar (North or South Pole) Operation.
  • High Sensitivity.
  • Single Open Drain Output.
  • Micropower Operation.
  • 2.5V to 5.5V Operating Range.
  • Chopper Stabilized Design Provides: Superior Temperature Stability Minimal Switch Point Drift Enhanced Immunity to Stress.
  • Good RF Noise Immunity.
  • -40°C to +85°C Operating Temperature.
  • ESD (HBM) > 6KV.
  • Small Low Profile SOT553 and Industry Standard SC59 and SIP-3 Packag.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AH180 MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR SWITCH Diodes Incorporated
AH182 (AH182 / AH183) LOW POWER HALL EFFECT SWITCH Diodes Incorporated
AH182 (AH182 / AH183) Low power Hall Effect Switch ANACHIP
AH183 (AH182 / AH183) LOW POWER HALL EFFECT SWITCH Diodes Incorporated
AH183 (AH182 / AH183) Low power Hall Effect Switch ANACHIP

Other Datasheets by Diodes Incorporated

Part Number Description
AH1801 ULTRA-SENSITIVE HALL EFFECT SWITCH
AH1802 ULTRA-SENSITIVE OMNIPOLAR HALL-EFFECT SENSOR SWITCH
AH1803 ULTRA-SENSITIVE HALL EFFECT SWITCH
AH1804 MICROPOWER OMNIPOLAR HALL EFFECT SENSORSWITCH
AH1807 MEDIUM SENSITIVITY MICROPOWER OMNIPLOAR HALL-EFFECT SWITCH

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NEW PRODUCT AH1806 HIGH SENSIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH Description The AH1806 is a high-sensitivity, micro-power Omnipolar Hall effect switch IC, designed for portable and battery powered consumer to home appliance and industrial applications such as smart-meter magnetic tamper detection. Based on two sensitive Hall effect plates and a copper stabilized architecture the AH1806 provides a reliable solution over the whole operating range. To support portable and battery powered equipment, the design has been optimized to operate over the supply range of 2.5V to 5.5V and consumes only 24µW with a supply of 3V. Pin Assignments (Top View) SC59 The single-open-drain output can be switched on with either a North or South pole of sufficient field strength.