© ABLIC Inc., 2011-2015
HIGH-SPEED BIPOLAR HALL EFFECT LATCH
The S-5725 Series, developed by CMOS technology, is a high-accuracy Hall IC that operates with a high-sensitivity, a high-
speed detection and low current consumption.
The output voltage changes when the S-5725 Series detects the intensity level of magnetic flux density and a polarity
change. Using the S-5725 Series with a magnet makes it possible to detect the rotation status in various devices.
High-density mounting is possible by using the small SOT-23-3 or the super-small SNT-4A packages.
Due to its high-accuracy magnetic characteristics, the S-5725 Series can make operation's dispersion in the system
combined with magnet smaller.
This product is intended to use in general electronic devices such as consumer electronics, office
equipment, and communications devices. Before using the product in medical equipment or
automobile equipment including car audio, keyless entry and engine control unit, contact to ABLIC Inc.
Detection logic for magnetism*1:
Operating cycle (current consumption)*1:
Power supply voltage range:
Operation temperature range:
Built-in power-down circuit:
Lead-free (Sn 100%), halogen-free
VOUT = "L" at S pole detection
VOUT = "H" at S pole detection
Nch open-drain output, CMOS output
BOP = 0.8 mT typ.
BOP = 1.8 mT typ.
BOP = 3.0 mT typ.
BOP = 7.0 mT typ.
tCYCLE = 50 s (IDD = 1400.0 A) typ.
tCYCLE = 1.25 ms (IDD = 60.0 A) typ.
tCYCLE = 6.05 ms (IDD = 13.0 A) typ.
VDD = 2.7 V to 5.5 V
Ta = 40°C to 85°C
Extends battery life (only SNT-4A)
*1. The option can be selected.
Plaything, portable game