G150XVN01.2 Datasheet | AU Optronics

Description This specification applies to the Color Active Matrix Liquid Crystal Display G150XVN01.2 posed of a TFT-LCD display, a driver and power supply circuit, and a LED backlight system. The screen format is intended to support LED driving board for backlight unit is included in G150XVN01.2. 2.1 Display Characteristics The following items are characteristics summary on the table under 25 o C condition: Items Screen Diagonal Active Area Resolution Pixel Pitch Pixel Arrangement Display Mode Nominal Input Voltage VDD Power Consumption Weight Physical Size Electrical Interface Surface Treatment Support Color Temperature Range Operating Storage (Non-Operating) Ro HS pliance Unit [inch] [mm] [mm] [Volt] [Watt] [Grams] [mm] [o C] [o C] Specifications 15.0" 304.128 (H) x 228.096 (V) 1024 x 768 0.297 (per one triad) x 0.297 R.G.B. Vertical Stripe VA, Normally Black +3.3 TBD 910(Typ) ±10% 326.5 (H) x 253.5 (V) x 9.6(D) (typ) one channel LVDS Hard-coating (3H), Anti-Glare treatment 16.2M / 262K colors -10 to +70 (Tgs) -30 to +70 (Ta) Yes G150XVN01.2 rev.0.1 5/23 Product Specification AU OPTRONICS CORPORATION 2.2 Optical Characteristics The optical characteristics are measured under stable conditions at 25 o C (Room Temperature): Item Unit Conditions Min. Typ. Max. White Luminance cd/m2 ILED=70m A(center point) - Uniformity Contrast Ratio Response Time Viewing Angle Color / Chromaticity Coordinates (CIE 1931) % -- msec 5 points Rising Falling Rising + Falling Horizontal CR >= 10 degree Vertical CR >= 10 Red x Red y Green x Green y -- Blue x Blue y White x White...