900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Agilent

AMMC-6140 Datasheet Preview

AMMC-6140 Datasheet

20 - 40 GHz Output x2 Active Frequency Multiplier

No Preview Available !

Agilent AMMC-6140
20 – 40 GHz Output x2
Active Frequency Multiplier
Data Sheet
Features
Input frequency range: 1020 GHz
Broad input power range: -9 to
+7 dBm
Output power: -1 to 0 dBm
(Pin = +4 dB)
Fundamental suppression of 25 dBc
50input and output match
Supply bias of -1.2V, 4.5V and
Chip Size:
1300 x 900 µm (64 x 40 mils)
27 mA
Chip Size Tolerance: ±10 µm (±0.4 mils)
Chip Thickness:
100 ± 10 µm (4 ± 0.4 mils)
Applications
Description
Agilent’s AMMC-6140 is an
Pad Dimensions:
120 x 80 µm (5x3 ± 0.4 mils)
Microwave radio systems
Satellite VSAT, DBS Up/Down Link
easy-to-use x2 active frequency
multiplier MMIC designed for
commercial communication
systems. The MMIC takes a 10 to
20 GHz input signal and doubles
it to 20 to 40 GHz. It could also
be used between 9–10 GHz and
20–22 GHz with slight degrada-
tion in Conversion Loss or
Attention:
Observe precautions for
handling electrostatic
sensitive devices.
ESD Machine Model (Class A)
ESD Human Body Model (Class 0)
Refer to Agilent Application Note A004R:
Electrostatic Discharge Damage and Control.
LMDS & Pt-Pt mmW Long Haul
Broadband Wireless Access
(including 802.16 and 802.20
WiMax)
WLL and MMDS loops
Commercial grade military
Fundamental Suppression. It has
an integrated matching, har-
monic suppression, and bias
network. The input/output are
matched to 50and fully DC
blocked. The MMIC is fabricated
Absolute Maximum Ratings[1]
Symbol Parameters/Conditions
Units Min. Max.
using PHEMT technology. The
backside of this die is both RF
and DC ground. This helps
simplify the assembly process
Vd
Vg
Id
Positive Drain Voltage
Gate Supply Voltage
Drain Current
V7
V -3.0 0.5
mA -3
and reduces assembly-related
performance variations and
costs. For improved reliability
and moisture protection, the die
is passivated at the active areas.
This MMIC is a cost effective
alternative to bulky hybrid FET
Pin CW Input Power
dBm 15
Tch Operating Channel Temperature
°C
+150
Tstg Storage Case Temperature
°C -65 +150
Tmax Maximum Assembly Temp (60 sec max) °C
+300
Note:
1. Operation in excess of any one of these conditions may result in permanent damage to this device.
and diode doublers that require
high input drive levels, have high
conversion loss and poor funda-
mental suppression.




Agilent

AMMC-6140 Datasheet Preview

AMMC-6140 Datasheet

20 - 40 GHz Output x2 Active Frequency Multiplier

No Preview Available !

AMMC-6140 DC Specifications/Physical Properties[1]
Symbol Parameters and Test Conditions
Units Min. Typ. Max.
Id Drain Supply Current (under any RF power drive and temperature) (Vd= 4.5V)
mA
27 40
Vg Gate Supply Operating Voltage
V -1.5 -1.2 -1.0
θ ch-b
Thermal Resistance[2] (Backside Temp. Tb = 25°C)
°C/W
25
Notes:
1. Ambient operational temperature TA= 25°C unless otherwise noted.
2. Channel-to-backside Thermal Resistance (θch-b) = 26°C/W at Tchannel (Tc) = 34°C as measured using infrared microscopy. Thermal Resistance at
backside temperature (Tb) = 25°C calculated from measured data.
RF Specifications[3,4, 5] (TA = 25°C, Vd= 4.5 V, Id(Q)= 27 mA, Z0 = 50)
Symbol Parameters and Test Conditions
Units
Minimum
Typical
Sigma
Fin Input Frequency
GHz 10 to 20
Fout Output Frequency
GHz 20 to 40
Po Output Power[6]
dBm -2
-1
0.4
Fo Fundamental Isolation (referenced to Po): 20 – 36 GHz
36 – 40 GHz
dBc
dBc
20
14
30
16
5.0
1.0
3Fo 3rd Harmonic Isolation (referenced to Po)
dBc
25 1.2
P-1dB
RLin
Output Power at 1dB Gain Compression
Input Return Loss[6]
dBm
dB
+5
-15
RLout
Output Return Loss[6]
dB -10
SSB Single Sideband Phase Noise (100 KHz offset)
dBc/Hz
-135
Notes:
3. Small/large signal data measured in wafer form TA = 25°C.
4. 100% on-wafer RF test is done at Pin = +4 dBm and output frequency = 20, 28, 36 and 40 GHz.
5. Specifications are derived from measurements in a 50test environment. Aspects of the multiplier performance may be improved over a narrower
bandwidth by application of additional matching.
Typical distribution of Pout, 2nd Harmonic and 3rd Harmonic Suppression (Fin=14 GHz).
Based on 2500 parts sampled over several production lots.
-2 -1
2Fo Pout (dBm) @ 28G Hz
2
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
Fo Suppression (dBm) @ 14 GHz
22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
3Fo Suppression (dBm) @ 42 GHz


Part Number AMMC-6140
Description 20 - 40 GHz Output x2 Active Frequency Multiplier
Maker Agilent
Total Page 6 Pages
PDF Download

AMMC-6140 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 AMMC-6140 20 - 40 GHz Output x2 Active Frequency Multiplier
Agilent





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy