Datasheet4U Logo Datasheet4U.com

A4772 - POWER SWITCHES

General Description

The A4772 is a low voltage, single N-MOSFET high-side power switch, optimized for self-powered and bus-powered Universal Serial Bus (USB) applications.

Key Features

  • include soft-start to limit inrush current during plug-in, thermal shutdown to prevent catastrophic switch failure from high-current loads, under-voltage lockout (UVLO) to ensure that the device remains off unless there is a valid input voltage present. The maximum current is limited to typically 2.1A/1.5A/1A/0.65A through the switch of A4772A/B/C/D, lower quiescent current as 25uA making this device ideal for portable battery-operated equipment. The A4772 is available in SOT-25 package.

📥 Download Datasheet

Datasheet Details

Part number A4772
Manufacturer AiT Semiconductor
File Size 497.34 KB
Description POWER SWITCHES
Datasheet download datasheet A4772 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
A471Jxxxx Leaded ceramic multilayer capacitors ETC
A471Kxxxx Leaded ceramic multilayer capacitors ETC
A471S00xxxx GAS DISCHARGE TUBE Littelfuse
A473 2SA473 Wing Shing Electronic

Other Datasheets by AiT Semiconductor

Part Number Description
A4770 POWER SWITCH
A4771 1A CURRENT LIMITED LOAD SWITCH
A4773 PRECISION LOAD SWITCH
A4776 ADJUSTABLE USB LOAD CURRENT SWITCH
A4776A 5V USB HIGH SIDE CURRENT LIMIT LOAD SWITCH

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AiT Semiconductor Inc. www.ait-ic.com A4772 POWER SWITCHES WITH FLAG 80mΩ, 0.5A/0.8A/1A/1.5A HIGH-SIDE DESCRIPTION The A4772 is a low voltage, single N-MOSFET high-side power switch, optimized for self-powered and bus-powered Universal Serial Bus (USB) applications. The A4772 equipped with a charge pump circuitry to drive the internal MOSFET switch; the switch's low RDS(ON), 80mΩ, meets USB voltage drop requirements and a flag output is available to indicate fault conditions to the local USB controller. Additional features include soft-start to limit inrush current during plug-in, thermal shutdown to prevent catastrophic switch failure from high-current loads, under-voltage lockout (UVLO) to ensure that the device remains off unless there is a valid input voltage present.