Datasheet4U Logo Datasheet4U.com

ATS601LSG - Single-Element Tooth-Detecting Speed Sensor

General Description

The ATS601LSG is a unique addition to the Allegro™ camshaft sensor IC family of products.

Key Features

  • Digital output representing target profile.
  • Single Hall element for twist-insensitive mounting and direction insensitive polarity.
  • True zero-speed operation.
  • Defined power-on state.
  • Air gap independent switch points.
  • Chopper stabilized.
  • Operation down to 3.3 V.
  • Factory programmable options: ▫ Output polarity: low or high opposite tooth ▫ Startup hysteresis: 40 G or 80 G ▫ Threshold location: 30% or 50% from signal peak ▫ Th.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ATS605LSG Dual Output Differential Speed and Direction Sensor Allegro MicroSystems
ATS610LSA HALL-EFFECT GEAR-TOOTH SENSOR ICS Allegro MicroSystems
ATS610LSC ZERO-SPEED/ SELF-CALIBRATING/ NON-ORIENTED/ HALL-EFFECT GEAR-TOOTH SENSOR Allegro MicroSystems
ATS611LSB HALL-EFFECT GEAR-TOOTH SENSOR ICS Allegro MicroSystems
ATS612JSB TRUE ZERO-SPEED/ HALL-EFFECT ADAPTIVE GEAR-TOOTH SENSOR Allegro MicroSystems

Other Datasheets by Allegro MicroSystems

Part Number Description
ATS668LSM True Zero-Speed High-Accuracy Gear Tooth Sensor
ATS679LSL Self-Calibrating TPOS Camshaft Speed Sensor
ATS684LSN Differential Gear Tooth Sensor
ATS692LSH Vibration Resistant Sensor
ATS693LSG Vibration Resistant Sensor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ATS601LSG Single-Element Tooth-Detecting Speed Sensor IC FEATURES AND BENEFITS • Digital output representing target profile • Single Hall element for twist-insensitive mounting and direction insensitive polarity • True zero-speed operation • Defined power-on state • Air gap independent switch points • Chopper stabilized • Operation down to 3.3 V • Factory programmable options: ▫ Output polarity: low or high opposite tooth ▫ Startup hysteresis: 40 G or 80 G ▫ Threshold location: 30% or 50% from signal peak ▫ Threshold update: single tooth (continuous) or four-tooth memory • Fully synchronous digital logic with Scan Path and IDDQ testing PACKAGE: 4-pin SIP (suffix SG) Not to scale DESCRIPTION The ATS601LSG is a unique addition to the Allegro™ camshaft sensor IC family of products.