6B50-1
Key Features
- Single-channel isolated signal-conditioning modules
- Accepts outputs from Thermocouple, millivolt, volt and current signals
- Can be remotely reconfigured for various sensor types and input ranges
- in a given application and carried in inventory
Applications
- 6B50-1 & 6B50-2 Functional Designed for industrial applications, the 6B Series modules incorporate transformer-based isolation with surface-mount manufacturing technology - providing increased reliability at low cost. The pact, rugged 6B Series analog modules can be mixed and matched on a 16-channel backplane for high density, remote process monitoring and control. munications between backplanes, modules and host is in ASCII over an RS-232C link or RS-485 bi-directional serial bus. Circuitry to convert RS-232C to RS485 is built into the 6B backplane. Baud rates are software programmable, with speeds up to 19.2 K Baud. The 6B Series digital subsystem munication is patible with the overall 6B Series munication protocol. Each digital I/O board can be configured for its address, baud rate and checksum status. Connection to the 16 and 24-channel solid state relay backplanes is by a 50-conductor ribbon cable. This enables interfacing with input and outputs from 4 V to 240 V. Power control modules are also available that can switch up to 3A and e with a variety of ratings for low voltage DC up to 280 VAC
