1.8 V to 5.5 V Single Supply
Low On Resistance (2.5 ⍀ Typ)
Low On-Resistance Flatness (0.5 ⍀)
–3 dB Bandwidth > 200 MHz
20-Lead 4 mm ؋ 4 mm Chip Scale Package
Fast Switching Times
tON = 16 ns
tOFF = 10 ns
Typical Power Consumption (< 0.01 W)
For Functionally Equivalent Devices in 16-Lead TSSOP
and SOIC Packages, See ADG711/ADG712/ADG713
Battery Powered Systems
Sample Hold Systems
Audio Signal Routing
Mechanical Reed Relay Replacement
2.5 ⍀ Quad SPST Switches
in Chip Scale Package
FUNCTIONAL BLOCK DIAGRAMS
SWITCHES SHOWN FOR A LOGIC “1” INPUT
The ADG781, ADG782, and ADG783 are monolithic CMOS
devices containing four independently selectable switches. These
switches are designed on an advanced submicron process that
provides low power dissipation and high switching speed, low on
resistance, low leakage currents and high bandwidth.
They are designed to operate from a single 1.8 V to 5.5 V sup-
ply, making them ideal for use in battery powered instruments
and with the new generation of DACs and ADCs from Analog
Devices. Fast switching times and high bandwidth make the
part suitable for video signal switching.
The ADG781, ADG782, and ADG783 contain four independent
single-pole/single throw (SPST) switches. The ADG781 and
ADG782 differ only in that the digital control logic is inverted.
The ADG781 switches are turned on with a logic low on the
appropriate control input, while a logic high is required to turn
on the switches of the ADG782. The ADG783 contains two
switches whose digital control logic is similar to the ADG781,
while the logic is inverted on the other two switches.
Each switch conducts equally well in both directions when ON.
The ADG783 exhibits break-before-make switching action.
The ADG781/ADG782/ADG783 are available in 20-lead chip
1. 20-Lead 4 mm ϫ 4 mm Chip Scale Package (CSP).
2. 1.8 V to 5.5 V Single Supply Operation. The ADG781,
ADG782, and ADG783 offer high performance and are
fully specified and guaranteed with 3 V and 5 V supply
3. Very Low RON (4.5 Ω max at 5 V, 8 Ω max at 3 V). At supply
voltage of 1.8 V, RON is typically 35 Ω over the temperature
4. Low On-Resistance Flatness.
5. –3 dB Bandwidth >200 MHz.
6. Low Power Dissipation. CMOS construction ensures low
7. Fast tON/tOFF.
8. Break-Before-Make Switching. This prevents channel shorting
when the switches are configured as a multiplexer (ADG783
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties that
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
© Analog Devices, Inc., 2002