ADL5601 Datasheet | Analog Devices

Data Sheet Features Fixed gain of 15 d B Operation from 50 MHz to 4.0 GHz Highest dynamic range gain block Input/output internally matched to 50 Ω Integrated bias control circuit OIP3 of 43.0 d Bm at 900 MHz P1d B of 19.0 d Bm at 900 MHz Noise figure of 3.7 d B at 900 MHz Single 5 V power supply Low quiescent current of 83 m A Thermally efficient SOT-89 package ESD rating of ±1.5 k V (Class 1C) GENERAL DESCRIPTION The ADL5601 is a broadband, 15 d B linear amplifier that operates at frequencies up to 4.0 GHz. The device can be used in a wide variety of cellular, cable television (CATV), military, and instrumentation equipment. The ADL5601 provides the highest dynamic range available from an internally matched gain block. This is acplished by providing extremely low noise figures and very high OIP3 specifications simultaneously, across the entire 4.0 GHz frequency range. The ADL5601 provides a gain of 15 d B, which is stable over frequency, temperature, and supply voltage, as well as from device to device. The device is internally matched to 50 Ω at the input and output, making the ADL5601 very easy to implement in a wide 50 MHz to 4.0 GHz RF/IF Gain Block FUNCTIONAL BLOCK DIAGRAM GND (2) 08219-001 1 RFIN BIAS 2 GND 3 RFOUT Figure 1. variety of applications. Only input/output ac coupling capacitors, power supply decoupling capacitors, and an external inductor are required for operation. The ADL5601 is fabricated on an In Ga P heterojunction bipolar transistor (HBT) process and has an ESD rating of ±1.5 k V (Class 1C). The device is available in a thermally efficient SOT-89 package. The ADL5601 consumes 83 m A on a single 5 V supply and is fully specified for operation from - 40°C to +85°C. A fully populated Ro HS-pliant evaluation board is available. Rev. A Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements...