Datasheet Details
| Part number | ADN2915 |
|---|---|
| Manufacturer | Analog Devices |
| File Size | 726.84 KB |
| Description | Continuous Rate 6.5 Mbps to 11.3 Gbps Clock/Data Recovery |
| Download | ADN2915 Download (PDF) |
|
|
| Part number | ADN2915 |
|---|---|
| Manufacturer | Analog Devices |
| File Size | 726.84 KB |
| Description | Continuous Rate 6.5 Mbps to 11.3 Gbps Clock/Data Recovery |
| Download | ADN2915 Download (PDF) |
|
|
|
Serial data input: 6.5 Mbps to 11.3 Gbps No reference clock required Exceeds SONET/SDH requirements for jitter transfer/generation/tolerance Quantizer sensitivity: 7.3 mV typical (limiting amplifier mode) Optional limiting amplifier, equalizer, and bypass inputs Programmable jitter transfer bandwidth to support G.8251 OTN Programmable slice level Sample phase adjust (5.65 Gbps or greater) Output polarity invert Programmable LOS threshold via I2C I2C to access optional
Data Sheet Continuous Rate 6.5 Mbps to 11.3 Gbps Clock and Data Recovery IC with Integrated Limiting.
| Part Number | Description |
|---|---|
| ADN2913 | Continuous Rate 6.5 Mbps to 8.5 Gbps Clock and Data Recovery |
| ADN2917 | Continuous Rate 8.5 Gbps to 11.3 Gbps Clock and Data Recovery IC |
| ADN2905 | CPRI and 10G Ethernet Data Recovery IC |
| ADN2928 | XFP Single Chip Transceiver IC |
| ADN2525 | 10.7 Gbps Active Back-Termination |
| ADN2526 | 11.3 Gbps Active Back-Termination Differential Laser Diode Driver |
| ADN2530 | 11.3 Gbps Active Back-Termination |
| ADN2531 | Differential Laser Diode Driver |
| ADN2804 | Clock and Data Recovery |
| ADN2805 | 1.25 Gbps Clock and Data Recovery IC |