ADRV9006 Datasheet | Analog Devices

FEATURES - 2 × 2 highly integrated transceiver - Center frequency range of 30 MHz to 6000 MHz - Transmitter and receiver bandwidth from 12 k Hz to 40 MHz - 2 fully integrated, fractional-N, RF synthesizers - LVDS and CMOS synchronous serial data interface options - Low power sleep modes - Frequency hopping - Fully programmable via a 4-wire SPI - 12 mm × 12 mm, 196-ball CSP_BGA APPLICATIONS - Mission critical munications - Very high frequency (VHF), ultrahigh frequency (UHF), and cellu- lar to 6 GHz - Time division duplexing (TDD) and frequency division duplexing (FDD) applications GENERAL DESCRIPTION The ADRV9006 is a highly integrated RF transceiver that has dual-channel transmitters, dual-channel receivers, integrated synthesizers, and digital signal processing functions. The ADRV9006 is a high performance, highly linear, high dynamic range transceiver designed for performance vs. power consumption system optimization. The device is configurable and ideally suited to demanding, low power, portable and battery powered equipment. The ADRV9006 operates from 30 MHz to 6000 MHz and covers the UHF, VHF, industrial, scientific, and medical (ISM) bands, and cellular frequency bands in narrow-band (k Hz) and wideband operation up to 40 MHz. The ADRV9006 is capable of both TDD and FDD operation. The transceiver consists of direct conversion signal paths with state-of-the-art noise figure and linearity. Each plete receiver and transmitter subsystem includes DC offset correction, quadrature error correction (QEC), and programmable digital filters, which eliminate the need for these functions in the digital baseband. In addition, several auxiliary functions, such as auxiliary analog-to-digital converters (ADCs), auxiliary digital-to-analog converters (DACs), and general-purpose inputs/outputs (GPIOs), are integrated to provide additional monitoring and control capability. The fully integrated phase-locked loops (PLLs) provide high performance, low power, fractional-N frequency...