MAX16491 Datasheet | Analog Devices

Description The MAX16491 is a fully integrated, highly efficient switching regulator for applications operating from 4.5V to 16V input supplies that require up to 9A maximum load. This single-chip regulator provides pact high-efficiency power delivery for precision outputs that demand fast transient response. The device has different programmability options to enable a wide range of configurations. The programmable Features include: internal/external reference voltage, output voltage set-point, switching frequency, overcurrentprotection level (OCP), and soft-start timing. Discontinuous current mode (DCM) operation can be enabled using pin-strapping to improve light-load efficiency. The MAX16491 includes multiple protection and measurement Features . Positive and negative cycle-by-cycle OCP, short-circuit protection and overtemperature protection (OTP) ensure robust design. Input undervoltage and overvoltage lockout shut down the regulator to prevent damages when the input voltage is out of specification. Regulation is halted in case of an output overvoltage (OVP) event. A status pin indicates that the output voltage is within range and the outputvoltage is in regulation. The device has an analog output that can be configured to report output current or junction temperature. The device is available in a 19-bump (2.2mm x 2.8mm) WLCSP package that provides low thermal resistance and minimizes the printed circuit board area. Applications - Servers/µServers - I/O and Chipset Supplies - GPU Core Supply - DDR Memory: VDDQ, VPP, and VTT - Point-of-Load (Po L) Applications CURRENT RATING (A) INPUT VOLTAGE (V) 4.5 to 16 OUTPUT VOLTAGE (V) 0.6 to 5.5 Ordering Information appears at end of data sheet. Benefits and Features - High-Efficiency Solution - Up to 96% Peak - Up to 95.5% Full Load - Up to 94% Light-Load Efficiency at 1A with DCM Enabled - Flexible Design Allows Early PCB Definition - Footprint patible with VT2491/VT2491A and Related Scalable Products -...