AFBR-S50LV85D Datasheet | Broadcom

Description The Broad® AFBR-S50LV85D is a multipixel optical distance and motion measurement sensor module that is based on the optical Time-of-Flight principle. The technology has been developed with a special focus on applications that need the highest speed and accuracy at medium distance ranges, with a small size and very low power consumption. Due to its ambient light suppression, use in outside environments is possible in sunlight. The sensor accurately measures against white, black, and colored surfaces as well as metallic and retroreflective surfaces. The module has an integrated infrared laser light source and an internal clock source. A single 5.0V power supply is required. Data is transferred using a digital Serial Peripheral Interface (SPI) using standard 3.3V CMOS levels. For system health monitoring, a reference pixel is used in addition to the integrated voltage and temperature sensors. Frame rates of up to 3 k Hz are supported, depending on the microcontroller, the data streaming mode, and the number of evaluated pixels. For frame rates of up to 100 Hz, a dual frequency (2f) mode is used to achieve an unambiguous range of up to 100m. Specifications - Single voltage supply of 5V - Typical current consumption of 33 m A - Integrated 850-nm laser light source - Typical optical peak output power of 40 m W - Typical optical average output power < 0.6 m W - Receiver with 32 pixels - Field of view per pixel of 1.55° × 1.55° - Transmitter beam width of 2° × 2° to illuminate typically 1 to 3 pixels - Distance range up to 30m and beyond - Operation temperature (ambient): - 20°C to 70°C - SPI digital interface up to 25 MHz - Size without pins: L × W × H: 12.4 mm × 7.6 mm × 7.9 mm Features - Very fast measurement rates of up to 3 k Hz - Operation up to 200 klx - Integrated calibrated clock source - Accuracy error typically below ± 1% - Unambiguous range up to 100m in 2f mode - Reference pixel for system health monitoring - Laser Class 1 eye safe ready Applications -...