Datasheet4U Logo Datasheet4U.com

DNT04 - Non-Isolated Point of Load DC/DC Power Modules

Description

The DNT series power modules have an On/Off pin for remote On/Off operation.

Both positive and negative On/Off logic options are available in the DNT series power modules.

Features

  • High Efficiency: 94%@ 5Vin, 3.3V/3A out Small size and low profile: 0.80” x 0.45” x 0.27” (SMD) 0.90” x 0.40” x 0.25” (SIP) Standard footprint and pinout Resistor-based trim Output voltage programmable from 0.75V to 3.3V via external resistors Pre-bias startup No minimum load required Fixed frequency operation Input UVLO, Output OTP, OCP Remote ON/OFF ISO 9001, TL 9000, ISO 14001, QS 9000, OHSAS 18001 certified manufacturing facility UL/cUL 60950 (US & Canada) Recognized, and TUV (EN60950)- pend.

📥 Download Datasheet

Datasheet Details

Part number DNT04
Manufacturer Delta Electronics
File Size 915.86 KB
Description Non-Isolated Point of Load DC/DC Power Modules
Datasheet download datasheet DNT04 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DNT2400 Low Cost 2.4 GHz FHSS Transceiver Module Murata
DNT90 Low Cost 900 MHz FHSS Transceiver Murata
DNT90CA (DNT90CA/PA) 900 MHz Frequency Hopping Spread Spectrum Transceiver RF Monolithics
DNT90PA (DNT90CA/PA) 900 MHz Frequency Hopping Spread Spectrum Transceiver RF Monolithics

Other Datasheets by Delta Electronics

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FEATURES High Efficiency: 94%@ 5Vin, 3.3V/3A out Small size and low profile: 0.80” x 0.45” x 0.27” (SMD) 0.90” x 0.40” x 0.25” (SIP) Standard footprint and pinout Resistor-based trim Output voltage programmable from 0.75V to 3.3V via external resistors Pre-bias startup No minimum load required Fixed frequency operation Input UVLO, Output OTP, OCP Remote ON/OFF ISO 9001, TL 9000, ISO 14001, QS 9000, OHSAS 18001 certified manufacturing facility UL/cUL 60950 (US & Canada) Recognized, and TUV (EN60950)- pending CE mark meets 73/23/EEC and 93/68/EECpending Delphi DNT04, Non-Isolated Point of Load www.DataSheet4U.com DC/DC Power Modules: 2.4~5.5Vin, 0.75~3.3Vo, 3A out OPTIONS The Delphi Series DNT04, 2.4-5.
Published: |