DGD0215 Datasheet | Diodes Incorporated

Description DGD0215/0216 1.5A HIGH SPEED SINGLE GATE DRIVER Features The DGD0215 and DGD0216 high speed / low side MOSFET and IGBT drivers are capable of driving 1.9A of peak current. The DGD0215 and DGD0216 logic inputs are patible with standard TTL and CMOS levels (down to 3.3V) to interface easily with MCUs. Internal undervoltage lockout (UVLO) will protect MOSFETs with loss of supply by turning off the output when Vcc falls below the operating range. Fast and well matched propagation delays allow high speed operation, enabling a smaller and more pact power switching design using smaller associated ponents. The DGD0215 and DGD0216 are highly resistant to noise, and are able to withstand up to 5V positive or negative on the ground pin without damage. The devices can also withstand 500m A of reverse current forced back into the outputs without damage or logic change. The DGD0215 provides an inverted output and the DGD0216 provides a non-inverting ouput. The DGD0215 and DGD0216 are offered in TSOT25 (Type TH) package and the operating temperature extends from -40°C to +125°C. Applications - Efficient Low Cost Solution for Driving MOSFETs and IGBTs - Wide Supply Voltage Operating Range: 4.5V to 18V - 1.9A Source / 1.8A Sink Output Current Capability - Inverting and Non-Inverting Input Configurations - Undervoltage Lockout for Vcc Supply - Fast Propagation Delay (35ns Typ.) - Fast Rise and Fall Times (15ns Typ.) - Logic Input (IN) 3.3V Capability - Extended Temperature Range: -40°C to +125°C - Totally Lead-Free & Fully Ro HS pliant (Notes 1 & 2) - Halogen and Antimony Free. “Green” Device (Note 3) Mechanical Data - Case: TSOT25 - Case Material: Molded Plastic. “Green” Molding pound. - UL Flammability Classification Rating 94V-0 - Moisture Sensitivity: Level 3 per J-STD-020 - Terminals: Finish - Matte Tin Plated Leads. Solderable per MIL- STD-202, Method 208 - Weight: 0.012 grams (Approximate) - DC-DC Converters - Line...