AH180 Datasheet PDF (MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR SWITCH)

AH180 - MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR SWITCH

Description

The AH180 is a micro-power Omnipolar Hall-Effect switch designed for portable and battery powered equipment such cellular phones, PDAs and portable PCs.

Based on two Hall-Effect plates and a chopper stabilized architecture the AH180 provides a reliable solution over the whole operating range.

Features

Omnipolar (North or South pole) Operation.
Micropower Operation.
Single Open Drain Output.
2.5V to 5.5V Operating Voltage.
Chopper Stabilized Design Provides.
Superior Temperature Stability.
Minimal Switch-Point Drift.
Enhanced Immunity to Stress.
Good RF Noise Immunity.
-40°C to +85°C Operating Temperature.
ESD (HBM) ＞ 6kV for SIP-3 (Ammo Pack), SIP-3 (Bulk Pack) and SC59 Packages.
SIP-3 (Ammo Pack), SIP-3 (Bulk Pack), SC59 (Commonly.

Datasheet Details

Part number	AH180
Manufacturer	Diodes Incorporated
File Size	607.66 KB
Description	MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR SWITCH
Datasheet	AH180 Datasheet

📁 Similar Datasheet

AH1801 - ULTRA-SENSITIVE HALL EFFECT SWITCH (Diodes)

AH1802 - ULTRA-SENSITIVE OMNIPOLAR HALL-EFFECT SENSOR SWITCH (Diodes)

AH1803 - ULTRA-SENSITIVE HALL EFFECT SWITCH (Diodes)

AH1804 - MICROPOWER OMNIPOLAR HALL EFFECT SENSORSWITCH (Diodes)

AH1806 - HIGH SENSIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH (Diodes)

AH1807 - MEDIUM SENSITIVITY MICROPOWER OMNIPLOAR HALL-EFFECT SWITCH (Diodes)

AH1808 - HIGH SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH (Diodes)

AH1809 - LOW SENSITIVITY MICROPOWER OMNIPLOAR HALL-EFFECT SWITCH (Diodes)

AH180N - MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH (Diodes)

AH1812 - HIGH SENSIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH (Diodes)

Full PDF Text Transcription

Click to expand full text

OBSOLETE – PART DISCONTINUED AH180 MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR SWITCH Description The AH180 is a micro-power Omnipolar Hall-Effect switch designed for portable and battery powered equipment such cellular phones, PDAs and portable PCs. Based on two Hall-Effect plates and a chopper stabilized architecture the AH180 provides a reliable solution over the whole operating range. To support portable and battery powered equipment the design has been optimized to operate over the supply range of 2.5V to 5.5V and consumes only 24μW with a supply of 3V. Pin Assignments (Top View) SIP-3 (Bulk Pack) 3. OUTPUT 2. GND 1. VDD The single open-drain output switches on with either a north or south pole of sufficient strength.

Published: May 10, 2007 |