EM4223 Datasheet | EM Microelectronic

Description The EM4223 chip is used in UHF passive read-only transponder applications. The chip derives its operating power from an RF beam transmitted by the reader, which is received and rectified by the chip. It transmits its factory-programmed code back to the reader by varying the amount of energy that is reflected from the chip antenna circuit (passive backscatter modulation). The air interface munication protocol is implemented according to ISO18000-6 type A. The code structure supports the effort of EPCglobal, Inc. as an industry accepted standard. It additionally incorporates the Fast Counting Supertag™ protocol for applications where the fast counting of large tag populations is required. The chip is frequency agile, and can be used in the range of 800 MHz to 2.5GHz for RF propagating field applications. Typical Applications - Supply chain management (SCM) - Tracking and tracing - Asset control - Licensing - Auto-tolling Key words - ISO 18000-6A - UHF - EPC™ data structure - Fast Supertag™ Features - Air interface is ISO18000-6 type A pliant - Supports EAN- UCC and EPC™ data structures as defined by the Auto-ID center - Supports Fast Counting Supertag™ mode - 128 bit user memory license plate Group select by means of ‘Application Family Identifier’ (AFI) according to ISO - Fast reading of user data during arbitration (no need to first take an inventory) - Specific mand set for supply chain logistics support. - Frequency independent: Typically used at 862 - 870 MHz, 902 - 950 MHz and 2.45 GHz - Low voltage operation - down to 1.0 V - Low power consumption - Cost effective - -40 to +85°C operating temperature range Benefits - Numbering scheme according to international standards - Operates worldwide according to the local radio regulation - Ideal for applications where long range and highspeed item identification is required Typical Operating Configuration Connect pad A+ And VSS to a dipole antenna A+ Copyright © 2004, EM Microelectronic-Ma...