FRM5W231KT Datasheet | Eudyna Devices

FEATURES - Data rate up to 2.5Gb/s - -32d Bm typ. sensitivity - 30µm active area APD chip with Ga As preamplifier - Small co-axial package with single mode fiber FRM5W231KT/LT APPLICATIONS - High bit rate long haul optical transmission systems operating at 2.5Gb/s DESCRIPTION These APD preamplifiers use an In Ga As APD chip with Ga As IC preamplifier. The KT package is designed for a horizontal PC board mount. The LT package is secured by a vertical flange. Each package is connected with single mode fiber by Nd: YAG welding. The detector preamplifier is DC coupled and has a low electrical output when the APD is illuminated. .. Edition 1.0 March 1999 FRM5W231KT/LT Parameter Storage Temperature Operating Temperature Supply Voltage APD Reverse Voltage APD Reverse Current Symbol Tstg Top Vss VR (Note 1) IR (Note 2) In Ga As-APD/Preamp Receiver ABSOLUTE MAXIMUM RATINGS (Tc=25°C, unless otherwise specified) Ratings -40 to +85 -40 to +85 -7 to 0 0 to VB 0.6 Unit °C °C V V m A OPTICAL & ELECTRICAL CHARACTERISTICS (Tc=25°C, λ=1,310/1,550nm, Vss=-5.2V, unless otherwise specified) Parameter APD Responsivity APD Breakdown Voltage Temperature Coefficient of VB Symbol R15 R13 VB γ Test Conditions 1,550nm, M=1 1,310nm, M=1 ID=10µA Note 3 AC-Coupled, f=100MHz, RL=50Ω, Pin <-20d Bm, AC-Coupled, RL=50Ω, M=3 to 15, -3d Bm from 1MHz AC-Coupled, RL=50Ω, Average within BW 2.488Gb/s NRZ, PRBS=223-1, B.E.R.=10-10, VR is set at optimum value Tc=-40 to +85°C 2.488Gb/s NRZ, M=3, PRBS=223-1, B.E.R.=10-10, VR is set at optimum value Tc=-40 to +85°C, M=3 Min. 0.80 0.75 40 0.08 Limits Typ. 0.85 0.85 50 0.12 Max. 65 0.15 Unit A/W A/W V V/°C Ω AC Transimpedance Zt - Bandwidth - GHz Equivalent Input Noise Current Density .. in - 6.5 -32 8 -31 p A/ Hz d Bm Sensitivity Pr -5 -31 - -30 - d Bm d...