UMFT601A-B Datasheet | FTDI

features refer to the FT60x datasheet. The UMFT60xx module has the following features : - Supports USB 3.0 Super Speed (5Gbps)/USB 2.0 High Speed (480Mbps)/USB 2.0 Full Speed (12Mbps) transfer - 4 IN channels and 4 OUT channels on FIFO bus connectivity - Supports multi voltage I/O: 1.8V, 2.5V and 3.3V - High speed connector for FIFO bus : FMC(Field Programmable Mezzanine Card) or HSMC (High Speed Mezzanine Card) - FMC connector is patible with most Xilinx FPGA reference design boards - HSMC is patible with most Altera FPGA reference design boards - Multi powered options: external DC powered, BUS powered, FMC/HSMC powered - Hardware Reset and Remote Wake Up - Micro-USB3.0 receptacle Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result of u se or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. Th is document provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH United Kingdom. Scotland Registered pany Number: SC136640 Copyright © Future Technology Devices International Limited UMFT60x FIFO TO USB 3.0 Bridge Evaluation Board Version...