Datasheet4U Logo Datasheet4U.com

74LCX14 - Low Voltage Hex Inverter

Description

The LCX14 contains six inverter gates each with a Schmitt trigger input.

They are capable of transforming slowly changing input signals into sharply defined, jitter-free output signals.

In addition, they have a greater noise margin than conventional inverters.

Features

  • s 5V tolerant inputs s 2.3V.
  • 3.6V VCC specifications provided s 6.5 ns tPD max (VCC = 3.3V), 10 µA ICC max s Power down high impedance inputs and outputs s ±24 mA output drive (VCC = 3.0V) s Implements patented noise/EMI reduction circuitry s Latch-up performance exceeds 500 mA s ESD performance: Machine model > 2000V Human model > 200V Ordering Code: Order Number 74LCX14M 74LCX14SJ 74LCX14MTC Package Number M14A M14D MTC14 Package.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74LCX125 Low-voltage CMOS quad bus buffer STMicroelectronics
74LCX125 Low Voltage Quad Buffer ON Semiconductor
74LCX125FT Low-Voltage Quad Bus Buffer Toshiba
74LCX139 LOW VOLTAGE CMOS DUAL 2 TO 4 DECODER/DEMULTIPLEXER ST Microelectronics
74LCX162244 LOW VOLTAGE CMOS 16-BIT BUS BUFFER ST Microelectronics

Other Datasheets by Fairchild (onsemi)

Part Number Description
74LCX10 Low Voltage Triple 3-Input NAND Gate
74LCX11 Low Voltage Triple 3-Input AND Gate
74LCX112 Low Voltage Dual J-K Negative Edge-Triggered Flip-Flop
74LCX125 Low Voltage Quad Buffer
74LCX126 Low Voltage Quad Buffer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74LCX14 Low Voltage Hex Inverter with 5V Tolerant Schmitt Trigger Inputs March 1995 Revised March 1999 74LCX14 Low Voltage Hex Inverter with 5V Tolerant Schmitt Trigger Inputs General Description The LCX14 contains six inverter gates each with a Schmitt trigger input. They are capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. In addition, they have a greater noise margin than conventional inverters. The LCX14 has hysteresis between the positive-going and negative-going input thresholds (typically 1.0V) which is determined internally by transistor ratios and is essentially insensitive to temperature and supply voltage variations. The inputs tolerate voltages up to 7V allowing the interface of 5V, 3V and 2.5V systems.
Published: |