HCPL2731 Datasheet | Fairchild Semiconductor

Single-Channel: 6N138, 6N139 Dual-Channel: HCPL2730, HCPL2731 Low Input Current High Gain Split Darlington Optocouplers April 2007 Single-Channel: 6N138, 6N139 Dual-Channel: HCPL2730, HCPL2731 Low Input Current High Gain Split Darlington Optocouplers Features - Low current - 0.5m A - Superior CTR-2000% - Superior CMR-10k V/µs - CTR guaranteed 0- 70°C - U.L. recognized (File # E90700) - VDE recognized (File # 120915) Ordering option V, tm Description The 6N138/9 and HCPL2730/HCPL2731 optocouplers consist of an Al Ga As LED optically coupled to a high gain split darlington photodetector. The split darlington configuration separating the input photodiode and the first stage gain from the output transistor permits lower output saturation voltage and higher speed operation than possible with conventional darlington phototransistor optocoupler. In the dual channel devices, HCPL2730/HCPL2731, an integrated emitter-base resistor provides superior stability over temperature. The bination of a very low input current of 0.5m A and a high current transfer ratio of 2000% makes this family particularly useful for input interface to MOS, CMOS, LSTTL and EIA RS232C, while output patibility is ensured to CMOS as well as high fan-out TTL requirements. An internal noise shield provides exceptional mon mode rejection of 10 k V/µs. e.g., 6N138V - Dual Channel - HCPL2730, HCPL2731 Applications - Digital logic ground isolation - Telephone ring detector - EIA-RS-232C line receiver .. - High mon mode noise line receiver - µP bus isolation - Current loop receiver Schematic Package N/C 1 8 VCC + 1 V F1 8...