Datasheet4U Logo Datasheet4U.com

FP7208 - Non-Synchronous PWM Boost Controller

Description

The FP7208 is boost topology switching regulator for LED driver.

It provides built-in gate driver pin for driving external N-MOSFET.

The non-inverting input of error amplifier connects to a 0.2V reference voltage.

Features

  • Start-up Voltage: 2.5V.
  • Wide Supply Voltage Operating Range: 4.5V to 24V.
  • Precision Feedback Reference Voltage: 0.2V (Max. ).
  • Analog and Digital Dimming Control.
  • Shutdown Current: 6μA (Max. ).
  • Internal Fixed Switching Frequency: 300KHz.
  • Programmable Soft Start Function (SS).
  • Programmable Over Voltage Protection (OVP).
  • Over Temperature Protection (OTP).
  • Package: SOP-8L(EP).

📥 Download Datasheet

Datasheet Details

Part number FP7208
Manufacturer Feeling Technology
File Size 512.65 KB
Description Non-Synchronous PWM Boost Controller
Datasheet download datasheet FP7208 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FP750SOT343 PACKAGED LOW NOISE/ MEDIUM POWER PHEMT Filtronic Compound Semiconductors
FP75R06KE3 IGBT Infineon
FP75R07N2E4 IGBT Infineon
FP75R12KE3 IGBT eupec GmbH
FP75R12KE3 IGBT Infineon

Other Datasheets by Feeling Technology

Part Number Description
FP7208B Non-Synchronous PWM Boost Controller
FP7201 Constant Current Switching Regulator
FP7209 Non-Synchronous PWM Boost Controller
FP726 LED driver IC
FP701 Single Operational Amplifier and Voltage Reference

Full PDF Text Transcription

Click to expand full text
FP7208 Non-Synchronous PWM Boost Controller for LED Driver General Description The FP7208 is boost topology switching regulator for LED driver. It provides built-in gate driver pin for driving external N-MOSFET. The non-inverting input of error amplifier connects to a 0.2V reference voltage. It has programmable soft start time set by external capacitor, and over voltage protection set by external resistor. The LED current can be adjusted by an external signal connecting to the EN pin. EN pin accepts either a DC voltage or a PWM signal. The PWM signal filter components are contained within the chip. Features  Start-up Voltage: 2.5V  Wide Supply Voltage Operating Range: 4.5V to 24V  Precision Feedback Reference Voltage: 0.2V (Max.
Published: |