GD25Q16C
Representative GD25Q16C image (package may vary by manufacturer)
Overview
GD25Q16C The GD25Q16C(16M-bit) Serial flash supports the standard Serial Peripheral Interface (SPI), and supports the Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (WP#), and I/O3 (HOLD#). The Dual I/O data is transferred with speed of 240Mbits/s and the Quad I/O & Quad output data is transferre.
- 16M-bit Serial Flash -2048K-Byte -256 Bytes per programmable page
- Standard, Dual, Quad SPI -Standard SPI: SCLK, CS#, SI, SO, WP#, HOLD# -Dual SPI: SCLK, CS#, IO0, IO1, WP#, HOLD# -Quad SPI: SCLK, CS#, IO0, IO1, IO2, IO3
- High Speed Clock Frequency -120MHz for fast read with 30PF load -Dual I/O Data transfer up to 240Mbits/s -Quad I/O Data transfer up to 480Mbits/s
- Fast Program/Erase Speed -Page Program time: 0.6ms typical -Sector Erase time: 45ms typical -Block Erase time: 0.15/0.25s typical -Chip Erase time: 7s typical
- Flexible Architecture -Uniform Sector of 4K-Byte -Uniform Block of 32/64K-Byte
- Low Power Consumption -1uA typical deep power down current -1uA typical standby current
- Software/Hardware Write Protection -Write protect all/portion of memory via software -Enable/Disable protection with WP# Pin -Top/Bottom Block protection
- Advanced Security Features -128-Bit Unique ID for each device -4x256-Byte security registers with OTP locks -Discoverable parameters (SFDP) register
- Minimum 100,000 Program/Erase Cycles
- Data Retention -20-year data retention typical
