Datasheet4U Logo Datasheet4U.com

HT42B534-x - USB to UART Bridge IC

Description

strings Internal 1.5kΩ pull-high resistor on D+ pin Fully-duplex Universal Asynchronous Receiver and Transmitter Interface UART Supports Baud Rate up to 3Mbps Supports maximum 128 bytes transmit buffer and 128 bytes receive

Features

  • Operating Voltage (VDD): 3.3V~5.5V.
  • UART pin Voltage (VDDIO): 1.8V~VDD (Less than VDD voltage).
  • Power down and wake-up functions to reduce power consumption.
  • Fully integrated 12MHz oscillator with 0.25% accuracy for all USB modes which requires no external components.
  • USB interface.
  • USB 2.0 Full Speed compatible.
  • Implements USB protocol composite device:.
  • Communication Device Class (CDC) for commu.

📥 Download Datasheet

📁 Similar Datasheet

  • HT400 - Commercial Grade Lampholders (Gilway Technical)
  • HT4054 - Li-ion Battery Charger (HOTCHIP)
  • HT4066 - Over Voltage Protection (HEROIC)
  • HT4100F - Relay (Htv)
  • HT4125 - Buffer Translator GATE (HEROIC)
  • HT4182 - 2-Cell Synchronous Boost Battery Charger (HEROIC)
  • HT431A - 3-terminal adjustable regulator (HTCSEMI)
  • HT431B - 3-terminal adjustable regulator (HTCSEMI)
  • HT431C - 3-terminal adjustable regulator (HTCSEMI)
  • HT4344A - Motor driver (HTCSEMI)
Other Datasheets by Holtek Semiconductor

Full PDF Text Transcription

Click to expand full text
HT42B534-x USB to UART Bridge IC Features • Operating Voltage (VDD): 3.3V~5.5V • UART pin Voltage (VDDIO): 1.8V~VDD (Less than VDD voltage) • Power down and wake-up functions to reduce power consumption • Fully integrated 12MHz oscillator with 0.25% accuracy for all USB modes which requires no external components • USB interface ♦♦ USB 2.0 Full Speed compatible ♦♦ Implements USB protocol composite device: –– Communication Device Class (CDC) for communications and configuration –– Human Interface Device (HID) for user configure USB VID, PID and device description strings ♦♦ Internal 1.
Published: |