256K x 8 LOW POWER and LOW V++
CMOS STATIC RAM
Access times of 55, 70, 100 ns
Low active power: 126 mW (max, L, LL)
Low standby power: 36 µW (max, L) and 7.2
µW (max, LL) CMOS standby
Low data retention voltage: 1.5V (min.)
Available in Low Power (-L) and Ultra-Low
Output Enable (OE) and two Chip Enable
TTL compatible inputs and outputs
Single 2.7V-3.6V power supply
Available in the 32-pin 8x20mm TSOP-1, 32-pin
8x13.4mm TSOP-1 and 48-pin 6*8mm T.-BGA
The 1+51 IC62LV2568L and IC62LV2568LL are low power
and low VCC, 262,144-bit words by 8 bits CMOS static RAMs.
They are fabricated using 1+51's high-performance CMOS
technology. This highly reliable process coupled with innova-
tive circuit design techniques, yields higher performance and
low power consumption devices.
When CE1 is HIGH or CE2 is LOW (deselected), the device
assumes a standby mode at which the power dissipation can
be reduced by using CMOS input levels.
Easy memory expansion is provided by using two Chip Enable
inputs, CE1 and CE2. The active LOW Write Enable (WE)
controls both writing and reading of the memory.
The IC62LV2568L and IC62LV2568LL are available in 32-pin
8*20mm TSOP-1, 8*13.4mm TSOP-1 and 48-pin 6*8mm T.-
.UNCTIONAL BLOCK DIAGRAM
2048 x 128 x 8
ICSI reserves the right to make changes to its products at any time without notice in order to improve design and supply the best possible product. We assume no responsibility for any errors
which may appear in this publication. © Copyright 2000, Integrated Circuit Solution Inc.
Integrated Circuit Solution Inc.