900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






IK Semiconductor

IN74ACT164 Datasheet Preview

IN74ACT164 Datasheet

8-Bit Serial-In Parallel-Out Shift Register

No Preview Available !

TECHNICAL DATA
8-Bit Serial-Input/Parallel-Output
Shift register
High-Speed Silicon-Gate CMOS
IN74ACT164
The IN74ACT164 is identical in pinout to the LS/ALS164,
HC/HCT164. The IN74ACT164 may be used as a level converter for
interfacing TTL or NMOS outputs to High Speed CMOS inputs.
The IN74ACT164 is an 8-bit, serial-input to parallel-output shift
register. Two serial data inputs, A1 and A2, are provided so that one input
may be used as a data enable. Data is entered on each rising edge of the
clock. The active-low asynchronous Reset overrides the Clock and Serial
Data inputs.
TTL/NMOS Compatible Input Levels
Outputs Directly Interface to CMOS, NMOS, and TTL
Operating Voltage Range: 4.5 to 5.5 V
Low Input Current: 1.0 µA; 0.1 µA @ 25°C
Outputs Source/Sink 24 mA
ORDERING INFORMATION
IN74ACT164N Plastic
IN74ACT164D SOIC
TA = -40° to 85° C for all packages
PIN ASSIGNMENT
LOGIC DIAGRAM
www.datasheet4uPP.IIcNNo714=m=GVNCDC
FUNCTION TABLE
Inputs
Outputs
Reset Clock A1 A2 QA QB ... QH
L X X X L L ... L
H
XX
no change
H
HD
D QAn ... QGn
H
DH
D QAn ... QGn
D = data input
X = don’t care
QAn - QGn = data shifted from the previous stage on a
rising edge at the clock input.
1




IK Semiconductor

IN74ACT164 Datasheet Preview

IN74ACT164 Datasheet

8-Bit Serial-In Parallel-Out Shift Register

No Preview Available !

IN74ACT164
MAXIMUM RATINGS*
Symbol
Parameter
Value
VCC
VIN
VOUT
IIN
IOUT
ICC
PD
DC Supply Voltage (Referenced to GND)
DC Input Voltage (Referenced to GND)
DC Output Voltage (Referenced to GND)
DC Input Current, per Pin
DC Output Sink/Source Current, per Pin
DC Supply Current, VCC and GND Pins
Power Dissipation in Still Air, Plastic DIP+
SOIC Package+
-0.5 to +7.0
-0.5 to VCC +0.5
-0.5 to VCC +0.5
±20
±50
±50
750
500
Tstg Storage Temperature
-65 to +150
TL Lead Temperature, 1 mm from Case for 10 Seconds
(Plastic DIP or SOIC Package)
260
*Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
+Derating - Plastic DIP: - 10 mW/°C from 65° to 125°C
SOIC Package: : - 7 mW/°C from 65° to 125°C
Unit
V
V
V
mA
mA
mA
mW
°C
°C
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
VCC DC Supply Voltage (Referenced to GND)
VIN, VOUT DC Input Voltage, Output Voltage (Referenced to GND)
TJ Junction Temperature (PDIP)
TA Operating Temperature, All Package Types
IOH Output Current - High
IOL Output Current - Low
tr, tf Input Rise and Fall Time *
(except Schmitt Inputs)
* VIN from 0.8 V to 2.0 V
VCC =4.5 V
VCC =5.5 V
Min Max Unit
4.5 5.5
V
0 VCC V
140 °C
-40 +85 °C
-24 mA
24 mA
0 10 ns/V
0 8.0
This device contains protection circuitry to guard against damage due to high static voltages or electric fields.
However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this
high-impedance circuit. For proper operation, VIN and VOUT should be constrained to the range GND(VIN or
VOUT)VCC.
Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC). Unused
outputs must be left open.
2


Part Number IN74ACT164
Description 8-Bit Serial-In Parallel-Out Shift Register
Maker IK Semiconductor
Total Page 6 Pages
PDF Download

IN74ACT164 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 IN74ACT161 4-Bit Synchronous Binary Counter
IK Semiconductor
2 IN74ACT163 4-Bit Synchronous Binary Counter
IK Semiconductor
3 IN74ACT164 8-Bit Serial-In Parallel-Out Shift Register
IK Semiconductor





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy