·
51 Hits
Wide Supply Voltage Range from 2.0V to 6.0V Sinks or Sources 8mA at VCC = 4.5V CMOS Low Power Consumption Schmitt Trigger Action at All Inputs...
·
41 Hits
a system designer may want in a shift register. It features parallel inputs, parallel outputs, right shift and left shift serial inputs, clear line. T...
·
29 Hits
I Asynchronous 8-bit parallel load I Synchronous serial input I Complies with JEDEC standard no. 7A I ESD protection:
N HBM JESD22-A114E exceeds 2000 ...
·
28 Hits
• 8-bit serial-in, parallel-out shift • Wide operating voltage range of 2 V to 6 V • High-current 3-state outputs can drive up to 15
LSTTL loads • Low...
·
20 Hits
ro package. The HCC/HCF40100B is a 32-stage shift register containing 32 D-type masterslave flip-flops. The data present at the SHIFTRIGHT INPUT is tr...
·
18 Hits
a
clock-inhibit (CLK INH) function and a complementary serial ( QH ) output.
Clocking is accomplished by a low-to-high transition of the
clock (CLK) i...
·
15 Hits
a multiplexed parallel input/output data port to achieve full 8-bit handling in a 20 pin package. Due to the large output drive capability and the 3-s...
·
15 Hits
* Up to 20V operation voltage * 12MHz (typ.) clock rate at 10V * Maximum input current of 1μA at 18V * Fully static operation * 8 master-slave flip-f...
·
15 Hits
)
N 20 20 Green (RoHS & no Sb/Br)
N 20 20 Green (RoHS & no Sb/Br)
DW 28
20 Green (RoHS & no Sb/Br)
DW 28
20 Green (RoHS & no Sb/Br)
DW 28 1000 ...
·
14 Hits
a serial input (DS) and a serial output (Q7S) to enable cascading and an asynchronous reset MR input. A LOW on MR will reset the shift register. Data ...
·
14 Hits
a serial input (DS) and a serial output (Q7S) to enable cascading and an asynchronous reset MR input. A LOW on MR will reset the shift register. Data ...
·
13 Hits
• 16-bit serial I/O shift register • 16-bit parallel-in/serial-out converter • Recirculating serial shifting • Common serial data I/O pin (3-State)
D...
·
13 Hits
two serial data inputs (DSA and DSB), eight parallel data outputs (Q0 to Q7). Data is entered serially through DSA or DSB and either input can be used...
·
13 Hits
Wide Supply Voltage Range from 2.0 V to 5.5V Sinks or sources 8mA at VCC = 4.5V CMOS low power consumption Schmitt Trigger Action at All Input...
This website uses cookies or similar technologies, to enhance your browsing experience and provide personalized recommendations. By continuing to use our website, you agree to our Privacy Policy