Datasheet4U Logo Datasheet4U.com

EL5176 - 250MHz Differential Twisted-Pair Driver

Description

PIN NUMBER 1 2 3 4 5 6 7 8 9 10 PIN NAME FBP IN+ REF INFBN OUTEN VS+ VSOUT+ PIN DESCRIPTION Non-inverting feedback input; resistor RF1 must be connected from this pin to VOUT Non-inverting input Output common-mode control; the common-mode voltage of VOUT will follow the voltage on this pin Inver

Features

  • Fully differential inputs, outputs, and feedback.
  • 250MHz 3dB bandwidth.
  • 800V/µs slew rate.
  • Low distortion at 20MHz.
  • Single 5V or dual ±5V supplies.
  • 40mA maximum output current.
  • Low power - 8mA typical supply current.
  • Pb-free (RoHS compliant).

📥 Download Datasheet

📁 Similar Datasheet

  • EL5170 - 100MHz Differential Twisted-Pair Driver (Renesas)
  • EL5171 - 250MHz Differential Twisted-Pair Drivers (Renesas)
  • EL5172 - 250MHz Differential Line Receiver (Renesas)
  • EL5173 - 450MHz Differential Twisted-Pair Driver (Renesas)
  • EL5174 - 550MHz Differential Twisted-Pair Driver (Renesas)
  • EL5175 - 550MHz Differential Line Receiver (Renesas)
  • EL5177 - 550MHz Differential Twisted-Pair Driver (Renesas)
  • EL5178 - 700MHz Differential Twisted-Pair Driver (Renesas)
  • EL51 - Output Pentode (Philips)
  • EL51 - Pentode (ETC)
Other Datasheets by Intersil
  • EL5120T - 12MHz Rail-to-Rail Input-Output Operational Amplifier
  • EL5123 - Rail-to-Rail Input-Output Buffers
  • EL5146 - 100MHz Single-Supply Rail-to-Rail Amplifiers
  • EL5185 - 4ns High-Speed Comparator
  • EL5192 - 600MHz Current Feedback Amplifier
  • EL5192A - 600MHz Current Feedback Amplifier
  • EL5221 - Dual 12MHz Rail-to-Rail Input-Output Buffer
  • EL5223 - Rail-to-Rail Input-Output Buffers

Full PDF Text Transcription

Click to expand full text
NORTECROEMCOMMENMDEENDDEERLDE51PF7LO1ARCNEEMWENDTEPSAIGRNTS DATASHEET 250MHz Differential Twisted-Pair Driver EL5176 The EL5176 is a high bandwidth amplifier with an output in differential form. It is primarily targeted for applications such as driving twisted-pair lines or any application where common mode injection is likely to occur. The input signal can be in either single-ended or differential form but the output is always in differential form. On the EL5176, two feedback inputs provide the user with the ability to set the device gain (stable at minimum gain of one). The output common mode level is set by the reference pin (REF), which has a -3dB bandwidth of over 50MHz. Generally, this pin is grounded but it can be tied to any voltage reference.
Published: |