Datasheet4U Logo Datasheet4U.com

EL5285 - Dual 4ns High-Speed Comparator

General Description

CONDITION MIN TYP MAX INPUT VOS IB CIN IOS VCM CMRR OUTPUT Input Offset Voltage Input Bias Current Input Capacitance Input Offset Current Input Voltage Range Common-mode Rejection Ratio VCM = 0V, VO = 2.5V VCM = 0V, VO = 2.5V -5.1V < VCM < +2.75V -10 -2.5 (VS-) - 0.1 65 14 -5 5 0.5 2.5 (VS+

Key Features

  • two separate comparators The EL5285 is available in the 14-pin SO package and is specified for operation over the full -40°C to +85°C temperature range. Also available are a single (EL5185), window comparator (EL5287), and quad versions (EL5485 and EL5486). Pinout EL5285 (14-PIN SO) TOP VIEW Features.
  • 4ns typ. propagation delay.
  • 5V to 12V input supply.
  • +2.7V to +5V output supply.
  • True-to-ground input.
  • Rail-to-rail outputs.
  • Active low latch.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
EL5285C Dual and Window 4ns High-Speed Comparators Elantec Semiconductor
EL5281C Dual 8ns High-Speed Comparator Elantec Semiconductor
EL5283C Dual and Window 8ns High-Speed Comparators Elantec Semiconductor
EL5287C Dual and Window 4ns High-Speed Comparators Elantec Semiconductor
EL5202 400MHz Slew Enhanced VFAs Renesas

Other Datasheets by Intersil (Renesas)

Part Number Description
EL5281 Dual 8ns High-Speed Comparator
EL5283 Window 8ns High-Speed Comparator
EL5221 Dual 12MHz Rail-to-Rail Input-Output Buffer
EL5223 Rail-to-Rail Input-Output Buffers
EL5227 Rail-toRail Buffers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
® cN1o-On8t8Ra8DcE-tIaCONotOTBauEMSrSROTMhSeLEcIeELNheTnDotEirEcPwDaRlwRSOwEuD.PpiUnpLtCoAeTrrCstEiClM.ecnEotmNeTr/tsact January 18, 2002 EL5285 FN7190 Dual 4ns High-Speed Comparator The EL5285 comparator is designed for operation in single supply and dual supply applications with 5V to 12V between VS+ and VS-. For single supplies, the inputs can operate from 0.1V below ground for use in ground sensing applications. The output side of the comparators can be supplied from a single supply of 2.7V to 5V. The rail-to-rail output swing enables direct connection of the comparator to both CMOS and TTL logic circuits. The latch input of the EL5285 can be used to hold the comparator output value by applying a low logic level to the pin.