CD22100 Datasheet | Intersil

Features - Low ON Resistance - . . . . .75Ω (Typ) at VDD = 12V - “Built-In” Control Latches - Large Analog Signal Capability - - - ±VDD/2 - 10MHz Switch Bandwidth - Matched Switch Characteristics ∆RON = 18Ω (Typ) at VDD = 12V - High Linearity - 0.5% Distortion (Typ) at f = 1k Hz, VIN = 5VP-P, VDD = 10V, and RL = 1kΩ - Standard CMOS Noise Immunity - 100% Tested for Maximum Quiescent Current at 20V Description CD22100 bines a 4 x 4 array of crosspoints (transmission gates) with a 4-line to 16-line decoder and 16 latch circuits. Any one of the sixteen transmission gates (crosspoints) can be selected by applying the appropriate four line address. The selected transmission gate can be turned on or off by applying a logic one or zero, respectively, to the data input and strobing the strobe input to a logic one. Any number of the transmission gates can be ON simultaneously. When the required operating power is applied to the CD22100, the states of the 16 switches are indeterminate. Therefore, all switches must be turned off by putting the strobe high and data in low, and then addressing all switches in succession. [ /Title (CD22 100) /Subject (CMO S4x4 Crosspoint Switch with Control Memory High Voltage Type (20V Rating)) / Author () /Keywords (Harris Semiconductor, Tele, SLICs, SLACs , Telephone, Ordering Information PART NUMBER CD22100E CD22100F TEMP. RANGE (o C) -40 to 85 -55 to 125 PACKAGE 16 Ld PDIP 16 Ld CERDIP PKG. NO. E16.3 F16.3 Pinout CD22100 (PDIP, CERDIP) TOP VIEW 1 2 3 4 5 6 7 8 16 VDD Functional Diagram STROBE 7 DATA IN 2 0 1 2 3 15 Y1 X2 DATA IN C D B A STROBE VSS 4-LINE TO 16-LINE DECODER 15 Y1 14 Y2 13 X4 ADDRESS 12 X3 11 Y4 10 Y3 9 X1 6 A 16 CONTROL LATCHES 14 Y2 5 B 10 8 9 10 11 Y3 3...