HCTS139MS Datasheet | Intersil

Features - 3 Micron Radiation Hardened SOS CMOS - Total Dose 200K RAD (Si) - SEP Effective LET No Upsets: >100 MEV-cm2/mg - Single Event Upset (SEU) Immunity < 2 x 10-9 Errors/ Bit-Day (Typ) - Dose Rate Survivability: >1 x 1012 RAD (Si)/s - Dose Rate Upset >1010 RAD (Si)/s 20ns Pulse - Latch-Up Free Under Any Conditions - Fanout (Over Temperature Range) - Bus Driver Outputs - 15 LSTTL Loads - Military Temperature Range: -55 o C to +125o C - Significant Power Reduction pared to LSTTL ICs - DC Operating Voltage Range: 4.5V to 5.5V - LSTTL Input patibility - VIL = 0.8V Max - VIH = VCC/2 Min - Input Current Levels Ii ≤ 5µA at VOL, VOH 16 LEAD CERAMIC METAL SEAL FLATPACK PACKAGE (FLATPACK) MIL-STD-1835 CDFP4-F16 TOP VIEW E1 A0 1 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VCC 2E 2 A0 2 A1 2 Y0 2 Y1 2 Y2 2 Y3 Description The Intersil HCTS139MS is a Radiation Hardened 2-to-4 line Decoder/Demultiplexer with an active low enable (E). Data on the select inputs (A0, A1) cause one of the four normally high outputs to go to a low logic level. The Demultiplexing function is performed by using the enable input as the data input. The HCTS139MS utilizes advanced CMOS/SOS technology to achieve high-speed operation. This device is a member of radiation hardened, high-speed, CMOS/SOS Logic Family with TTL input patibility. The HCTS139MS is supplied in a 16 lead Ceramic flatpack (K suffix) or a SBDIP Package (D suffix). A1 1 Y0 1 Y1 1 Y2 1 Y3 1 GND Ordering Information PART NUMBER HCTS139DMSR HCTS139KMSR HCTS139D/Sample HCTS139K/Sample HCTS139HMSR TEMPERATURE RANGE -55o C to +125o C -55o C to +125o C +25o C +25o C +25o C SCREENING LEVEL Intersil Class S Equivalent Intersil Class S Equivalent Sample Sample Die PACKAGE 16 Lead SBDIP 16 Lead Ceramic Flatpack 16 Lead SBDIP 16 Lead Ceramic Flatpack Die DB NA CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999 Spec Number File...