Datasheet4U Logo Datasheet4U.com

ML145583 - 3.3 Volt Only Driver/Receiver

General Description

VCC Digital Power Supply (Pin 27) This digital supply pin is connected to the logic power supply.

This pin should have a not less than 0.33 µF capacitor GND.

232 E connector (Pin 7) as we

Key Features

  • Drivers:.
  • ± 5 V Minimum Output Swing at 3.3 or 5.0 V Power Supply.
  • 300 Ω Power.
  • Off Impedance.
  • Output Current Limiting.
  • Three.
  • State Outputs During Standby Mode C5+ 28 1 SOIC 28W = -7P SOG.

📥 Download Datasheet

Datasheet Details

Part number ML145583
Manufacturer LANSDALE Semiconductor
File Size 367.59 KB
Description 3.3 Volt Only Driver/Receiver
Datasheet download datasheet ML145583 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ML1412R FOR OPTICAL INFORMATION SYSTEMS Mitsubishi
ML1413R FOR OPTICAL INFORMATION SYSTEM Mitsubishi
ML1469 4-channel BTL driver MINILOGIC
ML1000605D HIGH RELIABILITY RADIATION HARDENED LOW POWER DC-DC CONVERTER IRF
ML1001 Static LCD COG Driver Minilogic Device

Other Datasheets by LANSDALE Semiconductor

Part Number Description
ML145502 PCM Codec-Filter Mono-Circuit
ML145503 PCM Codec-Filter Mono-Circuit
ML145505 PCM Codec-Filter Mono-Circuit
ML145506 PCM Codec-Filter Mono-Circuit
ML145554 PCM Codec-Filter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com ML145583 3.3 Volt Only Driver/Receiver with an Integrated Standby Mode RS 232/EIA–232–E and CCITT V.28 Legacy Device: Motorola MC145583 The ML145583 is a CMOS transceiver composed of three drivers and five receivers that fulfills the electrical specifications of EIA–232–E, EIA–562, and CCITT V .28 while operating from a single + 3.3 or + 5.0 V power supply. This transceiver is a high–performance, low–power consumption device that is equipped with a standby function. A voltage tripler and inverter converts the + 3.3 V to ± 8.8 V , or a voltage doubler and inverter converts the + 5.0 V to ± 8.8 V . This is accomplished through an on–chip 40 kHz oscillator and five inexpensive external capacitors. FEATURES Drivers: • ± 5 V Minimum Output Swing at 3.3 or 5.