Datasheet4U Logo Datasheet4U.com

MAX196 - Multirange / Single %V / 12-Bit DAS with 12-Bit Bus Interface

General Description

The MAX196/MAX198 multirange, 12-bit data-acquisition systems (DAS) require only a single +5V supply for operation, yet convert analog signals at their inputs up to ±10V (MAX196) and ±4V (MAX198).

Key Features

  • o 12-Bit Resolution, 1/2LSB Linearity o Single +5V Supply Operation o Software-Selectable Input Ranges: ±10V, ±5V, 0V to +10V, 0V to +5V (MAX196) ±VREF, ±VREF/2, 0V to +VREF, 0V to +VREF/2 (MAX198) o Internal 4.096V or External Reference o Fault-Protected Input Multiplexer o 6 Analog Input Channels o 6µs Conversion Time, 100ksps Sampling Rate o Internal or External Acquisition Control o Two Power-Down Modes o Internal or External Clock _______________General.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1960 1MHz PWM Step-Down Controllers Maxim Integrated Products
MAX1961 1MHz PWM Step-Down Controllers Maxim Integrated Products
MAX1962 1MHz PWM Step-Down Controllers Maxim Integrated Products
MAX1963A 300mA LDO Regulators Maxim Integrated
MAX1964 Tracking/Sequencing Triple/Quintuple Power-Supply Controllers Maxim Integrated Products

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX1963 Low-Input-Voltage / 300mA LDO Regulators with RESETin SOT and TDFN
MAX1966 Low-Cost Voltage-Mode PWM Step-Down Controllers
MAX1968 Power Drivers for Peltier TEC Modules
MAX1969 Power Drivers for Peltier TEC Modules
MAX190 Low-Power / 12-Bit Sampling ADCs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-0435; Rev 0; 9/95 KIT ATION EVALU E L B A IL AVA Multirange, Single +5V, 12-Bit DAS with 12-Bit Bus Interface ____________________________Features o 12-Bit Resolution, 1/2LSB Linearity o Single +5V Supply Operation o Software-Selectable Input Ranges: ±10V, ±5V, 0V to +10V, 0V to +5V (MAX196) ±VREF, ±VREF/2, 0V to +VREF, 0V to +VREF/2 (MAX198) o Internal 4.