Datasheet4U Logo Datasheet4U.com

MAX710 - 3.3V/5V or Adjustable / Step-Up/Down DC-DC Converters

General Description

The MAX710/MAX711 integrate a step-up DC-DC converter with a linear regulator to provide step-up/down voltage conversion.

They are optimized for battery applications where the input varies above and below the regulated output voltage.

They have an input range from +1.8V to +11V.

Key Features

  • o Step-Up/Down Voltage Conversion o +1.8V to +11V Input Range o Output: 5V/250mA at VIN = 1.8V 5V/500mA at VIN = 3.6V o No External FETs Required o Load Disconnected from Input in Shutdown o Battery Drain: 200µA No-Load (VIN = 4V) 7µA in Standby 0.2µA when Off o Low-Noise and High-Efficiency Modes ______________Ordering Information PART MAX710C/D MAX710ESE MAX711C/D MAX711ESE TEMP. RANGE 0°C to +70°C -40°C to +85°C 0°C to +70°C -40°C to +85°C PIN-.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX71020A Energy Measurement AFE Silergy
MAX71020A Energy Measurement AFE Maxim Integrated
MAX71071 Dual-Channel Isolated Metrology ADCs Silergy
MAX71071 Dual-Channel Isolated Metrology ADCs Maxim Integrated
MAX71071H Dual-Channel Isolated Metrology ADCs Maxim Integrated

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX71020 Single-Chip Electricity Meter AFE
MAX711 3.3V/5V or Adjustable / Step-Up/Down DC-DC Converters
MAX712 NiCd/NiMH Battery Fast-Charge Controllers
MAX7129 4-1/2 Digit Single-Chip A/D Converter with LCD Driver
MAX700 Power-Supply Monitor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AVAILABLE EVALUATION KIT AVAILABLE MAX710/MAX711 3.3V/5V or Adjustable, Step-Up/Down DC-DC Converters _______________General Description The MAX710/MAX711 integrate a step-up DC-DC converter with a linear regulator to provide step-up/down voltage conversion. They are optimized for battery applications where the input varies above and below the regulated output voltage. They have an input range from +1.8V to +11V. Typical efficiency when boosting battery inputs is 85%. The MAX710/MAX711 can be configured for minimum noise or optimum efficiency. Shutdown control turns off the part completely, disconnecting the input from the output (ISHDN = 0.2µA). Standby control turns off only the step-up converter and leaves the low-power linear regulator active (IQ = 7µA). The MAX710 has a preset 3.