900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Maxim Integrated Semiconductor Electronic Components Datasheet

MAX9110 Datasheet

Single/Dual LVDS Line Drivers with Ultra-Low Pulse Skew in SOT23

No Preview Available !

19-1771; Rev 0; 9/00
Single/Dual LVDS Line Drivers with
Ultra-Low Pulse Skew in SOT23
General Description
The MAX9110/MAX9112 single/dual low-voltage differ-
ential signaling (LVDS) transmitters are designed for
high-speed applications requiring minimum power con-
sumption, space, and noise. Both devices support
switching rates exceeding 500Mbps while operating
from a single +3.3V supply, and feature ultra-low 250ps
(max) pulse skew required for high-resolution imaging
applications, such as laser printers and digital copiers.
The MAX9110 is a single LVDS transmitter, and the
MAX9112 is a dual LVDS transmitter.
Both devices conform to the EIA/TIA-644 LVDS standard.
They accept LVTTL/CMOS inputs and translate them to
low-voltage (350mV) differential outputs, minimizing elec-
tromagnetic interference (EMI) and power dissipation.
These devices use a current-steering output stage, mini-
mizing power consumption, even at high data rates. The
MAX9110/MAX9112 are available in space-saving 8-pin
SOT23 and SO packages. Refer to the MAX9111/
MAX9113 data sheet for single/dual LVDS line receivers.
________________________Applications
Laser Printers
Network Switches/Routers
Digital Copiers
LCD Displays
Cellular Phone Base
Stations
Telecom Switching
Equipment
Backplane Interconnect
Clock Distribution
Features
o Low 250ps (max) Pulse Skew for High-Resolution
Imaging and High-Speed Interconnect
o Space-Saving 8-Pin SOT23 and SO Packages
o Pin-Compatible Upgrades to DS90LV017/017A
and DS90LV027/027A (SO Packages)
o Guaranteed 500Mbps Data Rate
o Low 22mW Power Dissipation at 3.3V
(31mW for MAX9112)
o Conform to EIA/TIA-644 Standard
o Single +3.3V Supply
o Flow-Through Pinout Simplifies PC Board Layout
o Driver Outputs High Impedance when Powered Off
Ordering Information
PART
MAX9110EKA-T
MAX9110ESA
MAX9112EKA-T
MAX9112ESA
TEMP.
RANGE
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
PIN-
PACKAGE
8 SOT23-8
8 SO
8 SOT23-8
8 SO
TOP
MARK
AADN
AADO
Typical Operating Circuit appears at end of data sheet.
Pin Configurations/Functional Diagrams/Truth Table
TOP VIEW
VCC 1
DIN 2
N.C. 3
GND 4
MAX9110
SO
MAX9110
8 DO- DIN 1
7 DO+ GND 2
6 N.C. N.C. 3
5 N.C. VCC 4
8 DO- VCC 1
7 DO+ DIN1 2
6 N.C. DIN2 3
5 N.C. GND 4
SOT23
DIN_
L
H
0.8V < VDIN_ < 2.0V
DO_+
L
H
X
MAX9112
8 DO1- DIN1 1
7 DO1+ GND 2
6 DO2+ DIN2 3
5 DO2- VCC 4
MAX9112
SO
DO_-
H
L
X
SOT23
H = LOGIC LEVEL HIGH
L = LOGIC LEVEL LOW
X = UNDETERMINED
8 DO1-
7 DO1+
6 DO2+
5 DO2-
________________________________________________________________ Maxim Integrated Products 1
For free samples and the latest literature, visit www.maxim-ic.com or phone 1-800-998-8800.
For small orders, phone 1-800-835-8769.


Maxim Integrated Semiconductor Electronic Components Datasheet

MAX9110 Datasheet

Single/Dual LVDS Line Drivers with Ultra-Low Pulse Skew in SOT23

No Preview Available !

Single/Dual LVDS Line Drivers with
Ultra-Low Pulse Skew in SOT23
ABSOLUTE MAXIMUM RATINGS
Supply Voltage (VCC to GND) ..................................-0.3V to +4V
Input Voltage (VDIN_ to GND).....................-0.3V to (VCC + 0.3V)
Output Voltage (VDO_+, VDO_- to GND or VCC) ...-0.3V to +3.9V
Output Short-Circuit Duration
(DO_+, DO_- to VCC or GND) ................................Continuous
ESD Protection (Human Body Model, DO_+, DO_-)..........±11kV
Continuous Power Dissipation (TA = +70°C)
8-Pin SOT23 (derate 7.52mW/°C above +70°C)...........602mW
8-Pin SO (derate 5.88mW/°C above +70°C)...............471mW
Operating Temperature Range ...........................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering,10s) ..................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VCC = +3.0V to +3.6V, RL = 100±1%, TA = -40°C to +85°C, unless otherwise noted. Typical values are at VCC = +3.3V, TA =
+25°C.) (Notes 1, 2)
PARAMETER
Differential Output Voltage
Change in Magnitude of Output
Voltage for Complementary
Output States
Offset Voltage
Change in Magnitude of Offset
Voltage for Complementary
Output States
SYMBOL
VOD Figure 1
VOD Figure 1
VOS Figure 1
VOS Figure 1
CONDITIONS
MIN TYP MAX UNITS
250 350 450 mV
0 2 35 mV
1.125 1.25 1.375
V
0 2 25 mV
Power-Off Leakage Current
Short-Circuit Output Current
Input High Voltage
Input Low Voltage
Input Current High
Input Current Low
No-Load Supply Current
Supply Current
IO(OFF) VDO_ _ = 0 or VCC, VCC = 0 or open
IO(SHORT)
DIN_ = VCC, VDO_+ = 0 or
DIN_ = GND, VDO_- = 0
VIH
VIL
IIH DIN_ = VCC or 2V
IIL DIN_ = GND or 0.8V
ICC No load, DIN_ = VCC or 0
ICC DIN_ = VCC or 0
MAX9110
MAX9112
-10 +10 µA
-20 mA
2.0
VCC
V
GND
0.8 V
0 10 20 µA
-20 -3 0 µA
4.5 6 mA
6.7 8
mA
9.4 13
AC CHARACTERISTICS
(VCC = +3.0V to +3.6V, RL = 100±1%, CL = 5pF, TA = -40°C to +85°C, unless otherwise noted. Typical values are at VCC = +3.3V,
TA = +25°C.) (Notes 3, 4, 5; Figures 2, 3)
PARAMETER
Differential High-to-Low
Propagation Delay
Differential Low-to-High
Propagation Delay
Differential Pulse Skew
|tPHLD - tPLHD| (Note 6)
Channel-to-Channel Skew (Note 7)
SYMBOL
tPHLD
tPLHD
tSKD1
tSKD2
CONDITIONS
MIN TYP MAX UNITS
1 1.54 2.5 ns
1 1.58 2.5 ns
40 250 ps
70 400 ps
2 _______________________________________________________________________________________


Part Number MAX9110
Description Single/Dual LVDS Line Drivers with Ultra-Low Pulse Skew in SOT23
Maker Maxim
Total Page 8 Pages
PDF Download

MAX9110 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 MAX911 (MAX910 / MAX911) High SPeed Threshold Programmable Voltage Comparators
Maxim Integrated Products
2 MAX9110 Single/Dual LVDS Line Drivers with Ultra-Low Pulse Skew in SOT23
Maxim
3 MAX9111 Single/Dual LVDS Line Receivers with Ultra-Low Pulse Skew in SOT23
Maxim
4 MAX9112 Single/Dual LVDS Line Drivers with Ultra-Low Pulse Skew in SOT23
Maxim
5 MAX9113 Single/Dual LVDS Line Receivers with Ultra-Low Pulse Skew in SOT23
Maxim
6 MAX9115 Single LVDS Line Receiver in SC70
Maxim
7 MAX9117 Beyond-the-Rails Comparators With/Without Reference
Maxim
8 MAX9118 Beyond-the-Rails Comparators With/Without Reference
Maxim Integrated
9 MAX9119 Beyond-the-Rails Comparators With/Without Reference
Maxim Integrated





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy