DS26303 - Octal Line Interface Unit

Maxim Integrated Products

The DS26303 by Maxim Integrated Products is a Octal Line Interface Unit. Below is the official datasheet preview.

Datasheet Details

Part number	DS26303
Manufacturer	Maxim Integrated Products
File Size	1.00 MB
Description	Octal Line Interface Unit
Datasheet	DS26303_MaximIntegratedProducts.pdf
Additional preview pages of the DS26303 datasheet.

The DS26303 is an 8-channel short-haul line interface unit (LIU) that supports E1/T1/J1 from a single 3.3V power supply.

8 Complete E1, T1, or J1 Short-Haul Line Interface Units Independent E1, T1, or J1 Selections Internal Software-Selectable Transmit and Receive-Side Termination Crystal-Less Jitter Attenuator Selectable Single-Rail and Dual-Rail Mode and AMI or HDB3/B8ZS Line Encoding and Decoding Detection and Generation of AIS Digital/Analog Loss-of-Signal Detection as per T1.231, G.775, and ETS 300 233 External Master Clock can be Multiple of 2.048MHz or 1.544MHz for T1/J1 or E1 Operation; This Clock will be.

📁 DS26303 Similar Datasheet

DS26324 - E1/T1/J1 Short-Haul Line Interface Unit (Dallas Semiconductor)
DS26334 - E1/T1/J1 Shortand Long-Haul Line Interface Unit (Dallas Semiconductor)
DS2604 - NPN TRIPLE DIFFUSED TYPE (HIGH POWER SWITCHING/ HAMMER DRIVE/ PULSE MOTOR DRIVE APPLICATIONS) (Toshiba Semiconductor)
DS26401 - Octal T1/E1/J1 Framer (Dallas Semiconducotr)
DS26503 - T1/E1/J1 BITS Element (Dallas Semiconducotr)
DS2660-7R - 100 Watt DC-DC Converters (Power-One)
DS26C31M - CMOS Quad TRI-STATE Differential Line Driver (National Semiconductor)
DS26C31MQML - DS26C31MQML CMOS Quad TRI-STATE Differential Line Driver (Rev. A) (ETCTI)

Other Datasheets by Maxim Integrated Products

DS26101 - 8-Port TDM-to-ATM PHY
DS26102 - 16-Port TDM-to-ATM PHY
DS26502 - T1/E1/J1/64KCC BITS Element
DS26504 - T1/E1/J1/64KCC BITS Element
DS26518 - single-chip 8-port framer and line interface unit (LIU) combination
DS26519 - single-chip 16-port framer and line interface unit (LIU) combination

Published: Sep 5, 2007 |