Datasheet4U Logo Datasheet4U.com

DS26528 - Octal T1/E1/J1 Transceiver

Description

The DS26528 is a single-chip 8-port framer and line interface unit (LIU) combination for T1, E1, and J1 applications.

Each port is independently configurable, supporting both long-haul and short-haul lines.

Features

  • Eight Complete T1, E1, or J1 Long-Haul/ShortHaul Transceivers (LIU plus Framer) Independent T1, E1, or J1 Selections for Each Transceiver Internal Software-Selectable Transmit- and Receive-Side Termination for 100W T1 Twisted Pair, 110W J1 Twisted Pair, 120W E1 Twisted Pair, and 75W E1 Coaxial.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS26503 T1/E1/J1 BITS Element Dallas Semiconducotr
DS2604 NPN TRIPLE DIFFUSED TYPE (HIGH POWER SWITCHING/ HAMMER DRIVE/ PULSE MOTOR DRIVE APPLICATIONS) Toshiba Semiconductor
DS26324 E1/T1/J1 Short-Haul Line Interface Unit Dallas Semiconductor
DS26334 E1/T1/J1 Shortand Long-Haul Line Interface Unit Dallas Semiconductor
DS26401 Octal T1/E1/J1 Framer Dallas Semiconducotr

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
DS26522 Dual T1/E1/J1 Transceiver
DS26524 Quad T1/E1/J1 Transceiver
DS26502 T1/E1/J1/64KCC BITS Element
DS26504 T1/E1/J1/64KCC BITS Element
DS26518 single-chip 8-port framer and line interface unit (LIU) combination

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com DS26528 Octal T1/E1/J1 Transceiver www.maxim-ic.com GENERAL DESCRIPTION The DS26528 is a single-chip 8-port framer and line interface unit (LIU) combination for T1, E1, and J1 applications. Each port is independently configurable, supporting both long-haul and short-haul lines. FEATURES § § § Eight Complete T1, E1, or J1 Long-Haul/ShortHaul Transceivers (LIU plus Framer) Independent T1, E1, or J1 Selections for Each Transceiver Internal Software-Selectable Transmit- and Receive-Side Termination for 100W T1 Twisted Pair, 110W J1 Twisted Pair, 120W E1 Twisted Pair, and 75W E1 Coaxial Applications Crystal-Less Jitter Attenuators can be Selected for Transmit or Receive Path. The Jitter Attenuator meets ETSI CTR 12/13, ITU G.736, G.742, G.823, and AT&T PUB 62411.
Published: |